Skip to content Skip to navigation

Connexions

You are here: Home » Content » Capacity of a Channel

Navigation

Content Actions
  • Download module PDF
  • Add to ...
    Add the module to:
    • My Favorites
    • A lens
    • An external social bookmarking service
    • My Favorites (What is 'My Favorites'?)
      'My Favorites' is a special kind of lens which you can use to bookmark modules and collections directly in Connexions. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need a Connexions account to use 'My Favorites'.
    • A lens (What is a lens?)

      Definition of a lens

      Lenses

      A lens is a custom view of Connexions content. You can think of it as a fancy kind of list that will let you see Connexions through the eyes of organizations and people you trust.

      What is in a lens?

      Lens makers point to Connexions materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

      Who can create a lens?

      Any individual Connexions member, a community, or a respected organization.

      What are tags? tag icon

      Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

    • External bookmarks
  • E-mail the author
  • Rate this module (How does the rating system work?)

    Rating system

    Ratings

    Ratings allow you to judge the quality of modules. If other users have ranked the module then its average rating is displayed below. Ratings are calculated on a scale from one star (Poor) to five stars (Excellent).

    How to rate a module

    Hover over the star that corresponds to the rating you wish to assign. Click on the star to add your rating. Your rating should be based on the quality of the content. You must have an account and be logged in to rate content.

    		(0 ratings)

Recently Viewed

This feature requires Javascript to be enabled.

Tags

(What is a tag?)

These tags come from the endorsement, affiliation, and other lenses that include this content.

Capacity of a Channel

Module by: Don Johnson

Summary: Shannon derived the maximum datarate of a source coder's output that can be transmitted through a bandlimited additive white noise channel with no error.

Note: Your browser may not currently support MathML. See our browser support page for additional details. You can always view the correct math in the PDF version.

Note: You are viewing an old version of this document. The latest version is available here.

In addition to the Noisy Channel Coding Theorem and its converse, Shannon also derived the capacity for a bandlimited (to WW Hz) additive white noise channel. For this case, the signal set is unrestricted, even to the point that more than one bit can be transmitted each "bit interval." Instead of constraining channel code efficiency, the revised Noisy Channel Coding Theorem states that some error-correcting code exists such that as the block length increases, error-free transmission is possible if the source coder's datarate, BA¯R B A R , is less than capacity.

C=Wlog21+SNR bits/s C W 2 1 SNR bits/s (1)
This result proscribes the maximum datarate of the source coder's output that can be transmitted through the bandlimited channel with no error. (The bandwidth restriction arises not so much from channel properties, but from spectral regulation, especially for wireless channels.) Shannon's proof of his theorem was very clever, and did not indicate what this code might be; it has never been found. Codes such as the Hamming code work quite well in practice to keep error rates low, but they remain greater than zero. Until the "magic" code is found, more important in communication system design is the converse. It states that if your data rate exceeds capacity, errors will overwhelm you no matter what channel coding you use. For this reason, capacity calculations are made to place limits on transmission rates.

Exercise 1

The first definition of capacity applies only for binary symmetric channels, and represents the number of bits/transmission. The second result states capacity more generally, having units of bits/second. How would you convert the first definition's result into units of bits/second?

Solution

To convert to bits/second, we divide the capacity stated in bits/transmission by the bit interval duration TT.

Example 1

The telephone channel has a bandwidth of 3 kHz and a signal-to-noise ratio exceeding 30 dB (at least they promise this much). The maximum data rate a modem can produce for this wireline channel and hope that errors will not become rampant is the capacity.

C=3×103log21+103= 29.901 kbps C 3 10 3 2 1 10 3 29.901 kbps (2)
Thus, the so-called 33 kbps modems operate right at the capacity limit.

Note that the data rate allowed by the capacity can exceed the bandwidth when the signal-to-noise ratio exceeds 0 dB0 dB. Our results for BPSK and FSK indicated the bandwidth they require exceeds 1T 1 T . What kind of signal sets might be used to achieve capacity? Modem signal sets send more than one bit/transmission using a number, one of the most popular of which is multi-level signaling. Here, we can transmit several bits during one transmission interval by representing bit by some signal's amplitude. For example, two bits can be sent with a signal set comprised of a sinusoid with amplitudes of ±A ± A and ± A2 ± A 2 .

Comments, questions, feedback, criticisms?

Send feedback