Like finite impulse-response (FIR) filters, infinite impulse-response (IIR) filters are linear time-invariant (LTI) systems that can recreate a large range of different frequency responses. Compared to FIR filters, IIR filters have both advantages and disadvantages. On one hand, implementing an IIR filter with certain stopband-attenuation and transition-band requirements typically requires far fewer filter taps than an FIR filter meeting the same specifications. This leads to a significant reduction in the computational complexity required to achieve a given frequency response. However, the poles in the transfer function require feedback to implement an IIR system. In addition to inducing nonlinear phase in the filter (delaying different frequency input signals by different amounts), the feedback introduces complications in implementing IIR filters on a fixed-point processor. Some of these complications are explored in IIR Filtering: Filter-Coefficient Quanitization Exercise in MATLAB.
Later, in the processor exercise, you will explore the advantages and disadvantages
of IIR filters by implementing and examining a fourth-order IIR
system on a fixed-point DSP. The IIR filter should be
implemented as a cascade of two second-order, Direct Form II
sections. The data flow for a second-order, Direct-Form II section, or
bi-quad, is shown below. Note that in Direct Form II,
the states (delayed samples) are neither the input nor the
output samples, but are instead the intermediate values
 |
