Summary: You will implement three audio effects: a fixed-length delay, a variable-length delay, and a feedback-echo. All require storing many samples in external memory.
Many audio effects require storing thousands of samples in memory on the DSP. Because there is not enough memory on the DSP microprocessor itself to store so many samples, external memory must be used.
In this exercise, you will use external memory to implement a long audio delay and an audio echo. Refer to Core File: Accessing External Memory on TI TMS320C54x for a description and examples of accessing external memory.
You will implement three audio effects: a long, fixed-length delay, a variable-length delay, and a feedback-echo.
First, implement the 131,072-sample delay shown in Figure 1 using the READPROG and
WRITPROG macros. Use memory locations
010000h-02ffffh in external
Program RAM to do this; you may also want to use the
dld and dst opcodes to store and
retrieve the 32-bit addresses for the accumulators. Note
that these two operations store the words in memory in
big-endian order, with the high-order word first.
 |
Remember that arithmetic operations that act on the
accumulators, such as the add instruction,
operate on the complete 32- or 40-bit value. Also keep in
mind that since 131,072 is a power of two, you can use
masking (via the and instruction) to implement
the circular buffer easily. This delay will be easy to
verify on the oscilloscope. (How long, in seconds, do you
expect this delay to be?)
Once you have your fixed-length delay working, make a copy and modify it so that the delay can be changed to any length between zero (or one) and 131,072 samples by changing the value stored in one double-word pair in memory. You should keep the buffer length equal to 131,072 and change only your addressing of the sample being read back; it is more difficult to change the buffer size to a length that is not a power of two.
Verify that your code works as expected by timing the delay from input to output and ensuring that it is approximately the correct length.
Last, copy and modify your code so that the value taken from the end of the variable delay from Variable-delay implementation is multiplied by a gain factor and then added back into the input, and the result is both saved into the delay line and sent out to the digital-to-analog converters. Figure 2 shows the block diagram. (It may be necessary to multiply the input by a gain as well to prevent overflow.) This will make a one-tap feedback echo, an simple audio effect that sounds remarkably good. To test the effect, connect the DSP EVM input to a CD player or microphone and connect the output to a loudspeaker. Verify that the echo can be heard multiple times, and that the spacing between echoes matches the delay length you have chosen.
 |
More about this module: Metadata | Downloads | Version History
This work is licensed by Douglas L. Jones, Swaroop Appadwedula, Matthew Berry, Mark Haun, Dima Moussa, Daniel Sachs, Jake Janovetz, Michael Kramer, and Brian Wade under a Creative Commons Attribution License (CC-BY 1.0), and is an Open Educational Resource.
Last edited by Connexions on Jun 3, 2009 3:28 pm -0500.
"Doug course at UIUC using the TI C54x DSP has been adopted by many EE, CE and CS depts Worldwide "