# Connexions

You are here: Home » Content » Adaptive Filtering: LMS Algorithm

### Recently Viewed

This feature requires Javascript to be enabled.

### Tags

(What is a tag?)

These tags come from the endorsement, affiliation, and other lenses that include this content.

Summary: This module introduces adaptive filters through the example of system identification using the LMS algorithm. The adaptive filter adjusts its coefficients to minimize the mean-square error between its output and that of an unknown system.

Note: You are viewing an old version of this document. The latest version is available here.

## Introduction

Figure 1 is a block diagram of system identification using adaptive filtering. The objective is to change (adapt) the coefficients of an FIR filter, W W, to match as closely as possible the response of an unknown system, H H. The unknown system and the adapting filter process the same input signal xn x n and have outputs dn d n (also referred to as the desired signal) and yn y n .

The adaptive filter, W W, is adapted using the least mean-square algorithm, which is the most widely used adaptive filtering algorithm. First the error signal, en e n , is computed as en=dnyn e n d n y n , which measures the difference between the output of the adaptive filter and the output of the unknown system. On the basis of this measure, the adaptive filter will change its coefficients in an attempt to reduce the error. The coefficient update relation is a function of the error signal squared and is given by

h n + 1 i= h n i+μ2(|e|2 h n i ) h n + 1 i h n i μ 2 h n i e 2
(1)

The term inside the parentheses represents the gradient of the squared-error with respect to the i th i th coefficient. The gradient is a vector pointing in the direction of the change in filter coefficients that will cause the greatest increase in the error signal. Because the goal is to minimize the error, however, Equation 1 updates the filter coefficients in the direction opposite the gradient; that is why the gradient term is negated. The constant μ μ is a step-size, which controls the amount of gradient information used to update each coefficient. After repeatedly adjusting each coefficient in the direction opposite to the gradient of the error, the adaptive filter should converge; that is, the difference between the unknown and adaptive systems should get smaller and smaller.

To express the gradient decent coefficient update equation in a more usable manner, we can rewrite the derivative of the squared-error term as

|e|2 hi =2e hi e=2(dy) hi e=(2(d i =0N1hixni) hi )e h i e 2 2 h i e e 2 h i d y e 2 h i d i 0 N 1 h i x n i e
(2)
|e|2 hi =2(xni)e h i e 2 2 x n i e
(3)
which in turn gives us the final LMS coefficient update,
h n+1 i= h n i+μexni h n+1 i h n i μ e x n i
(4)
The step-size μ μ directly affects how quickly the adaptive filter will converge toward the unknown system. If μ μ is very small, then the coefficients change only a small amount at each update, and the filter converges slowly. With a larger step-size, more gradient information is included in each update, and the filter converges more quickly; however, when the step-size is too large, the coefficients may change too quickly and the filter will diverge. (It is possible in some cases to determine analytically the largest value of μ μ ensuring convergence.)

## MATLAB Simulation

Simulate the system identification block diagram shown in Figure 1.

Previously in MATLAB, you used the filter command or the conv command to implement shift-invariant filters. Those commands will not work here because adaptive filters are shift-varying, since the coefficient update equation changes the filter's impulse response at every sample time. Therefore, implement the system identification block on a sample-by-sample basis with a do loop, similar to the way you might implement a time-domain FIR filter on a DSP. For the "unknown" system, use the fourth-order, low-pass, elliptical, IIR filter designed for the IIR Filtering: Filter-Design Exercise in MATLAB.

Use Gaussian random noise as your input, which can be generated in MATLAB using the command randn. Random white noise provides signal at all digital frequencies to train the adaptive filter. Simulate the system with an adaptive filter of length 32 and a step-size of 0.02 0.02. Initialize all of the adaptive filter coefficients to zero. From your simulation, plot the error (or squared-error) as it evolves over time and plot the frequency response of the adaptive filter coefficients at the end of the simulation. How well does your adaptive filter match the "unknown" filter? How long does it take to converge?

Once your simulation is working, experiment with different step-sizes and adaptive filter lengths.

## Processor Implementation

Use the same "unknown" filter as you used in the MATLAB simulation.

Although the coefficient update equation is relatively straightforward, consider using the lms instruction available on the TI processor, which is designed for this application and yields a very efficient implementation of the coefficient update equation.

To generate noise on the DSP, you can use the PN generator from the Digital Transmitter: Introduction to Quadrature Phase-Shift Keying, but shift the PN register contents up to make the sign bit random. (If the sign bit is always zero, then the noise will not be zero-mean and this will affect convergence.) Send the desired signal, dn d n , the output of the adaptive filter, yn y n , and the error to the D/A for display on the oscilloscope.

When using the step-size suggested in the MATLAB simulation section, you should notice that the error converges very quickly. Try an extremely small μ μ so that you can actually watch the amplitude of the error signal decrease towards zero.

## Extensions

If your project requires some modifications to the implementation here, refer to Haykin and consider some of the following questions regarding such modifications:

• How would the system in Figure 1 change for different applications? (noise cancellation, equalization, etc.)
• What happens to the error when the step-size is too large or too small?
• How does the length of an adaptive FIR filters affect convergence?
• What types of coefficient update relations are possible besides the described LMS algorithm?

## References

1. S. Haykin. (1996). Adaptive Filter Theory. (3rd edition). Prentice Hall.

## Content actions

### Give feedback:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

#### Definition of a lens

##### Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

##### What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

##### Who can create a lens?

Any individual member, a community, or a respected organization.

##### What are tags?

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks