We ran our tests of the system with the following constraints:
- Bitstream length: 512
- Block-size: 128 (DMT), 1 (SC)
- AWGN amplitude: .00001 - 1
- Channel impulse response length: 1 (wire), 16
- Cyclic prefix length (DMT): 0, 8, 16
- Impulse noise: 0
- Constellation size: 16-point
The results of our tests were as expected. For wire channel, SC and DMT were comparable. They both demonstrated a Q-function behavior, dropping to zero error once the SNR was high enough and leveling off to about 0.5 (i.e. a coin flip) for very low SNR. For impulse response length
L less than cyclic prefix
C, DMT dropped to a error fell from 0.5 as SNR increased, but leveled off once ISI began to have a more prominent effect. Single-carrier also demonstrated this same behavior, though there was no cyclic prefix involved. This was a little strange, but this project's goal was to study DMT, not SC. Once the cyclic pad length was larger than the impulse response length, DMT again displayed Q-function behavior as ISI was no longer a problem.
"assafdf"