Skip to content Skip to navigation Skip to collection information
Inside Collection (Course): Microcontroller and Embedded Systems Laboratory
Summary: Gives a brief explaination of a digital clock.
The clock of a digital system is a periodic signal, usually a square wave, used to trigger memory latches simultaneously throughout the system. While no part of this definition is strictly true, it does convey the basic idea. Square waves are used because the quick transitions between high and low voltages minimize the time spent at uncertain digital levels. The clock ideally reaches all parts of the system at the same time in order to prevent sections from getting out of sync. Clock signals are generally periodic because the user wants to run the system as fast as possible, but this is often not a necessary attribute.
 |
Clock signals are used to synchronize digital transmitters and receivers during data transfer. For example, a transmitter can use each rising edge of the clock signal of Figure 1 to send a chunk of data.
A faster clock rate all means that you can process more instructions in a given amount of time.
More about this module: Metadata | Downloads | Version History
This work is licensed by CJ Ganier and adrian valenzuela under a Creative Commons Attribution License (CC-BY 1.0), and is an Open Educational Resource.
Last edited by CJ Ganier on Aug 21, 2005 6:59 pm -0500.
"Basic introduction to microcontroller-based embedded systems development. Includes structured laboratory exercises in the following areas: assembly programming, C language programming, peripheral […]"