# Connexions

You are here: Home » Content » Microcontroller and Embedded Systems Laboratory » Introduction to Programming the MSP430

### Lenses

What is a lens?

#### Definition of a lens

##### Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

##### What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

##### Who can create a lens?

Any individual member, a community, or a respected organization.

##### What are tags?

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

#### Affiliated with (What does "Affiliated with" mean?)

This content is either by members of the organizations listed or about topics related to the organizations listed. Click each link to see a list of all content affiliated with the organization.
• TI MSP430

This module and collection are included inLens: Texas Instruments MSP430
By: Texas Instruments

"Basic introduction to microcontroller-based embedded systems development. Includes structured laboratory exercises in the following areas: assembly programming, C language programming, peripheral […]"

"This is a basic tutorial on how to program the basic digital peripherals on the MSP430 on the MSP430F16x Lite Development Board."

Click the "TI MSP430" link to see all content affiliated with them.

Click the tag icon to display tags associated with this content.

### Recently Viewed

This feature requires Javascript to be enabled.

### Tags

(What is a tag?)

These tags come from the endorsement, affiliation, and other lenses that include this content.

Inside Collection (Course):

# Introduction to Programming the MSP430

Module by: adrian valenzuela. E-mail the author

Summary: This is a basic tutorial on how to program the basic digital peripherals on the MSP430 on the MSP430F16x Lite Development Board.

## Configuring Digital I/O

Digital I/O such as the LEDs and pushbuttons are configured by modifying a several registers pertaining to the port that they are attached to. Check the datasheet to find the respective port number of the peripheral you which to control. For more detailed information about Digital I/O on the MSP430 check Chapter 9: Digital I/O of the User’s Guide.

First, we must assign the direction of the corresponding I/O pins. This is done by setting the direction register, PxDIR, with the appropriate bit. By default, all I/O pins are assigned to be inputs.

• Bit = 0: The port pin is switched to input direction.
• Bit = 1: The port pin is switched to output direction.

On the MSP430F16x Lite Development Board the three LEDs are located on Ports 1 and 2. The port number will correspond the to x value in registers such as PxIN, PxOUT, or PxDIR. Therefore, if we wanted to define the direction of a pin on port 2 we would write to P2DIR.

### Exercise 1

How do we switch the three pins (P1.7, P2.2, and P2.3) corresponding to the LEDs to be outputs?

#### Solution


P1DIR |= 0x80;
P2DIR |= 0x0C;


0x0C in hex is equivalent to 0b00001100 in binary. Similarly, 0x80 = 0b10000000. You may refer to the module about Binary and Hexadecimal Notation to learn how to do this conversion or you could use the Windows Calculator (Start -> Run... -> Calc) to do it much more quickly. We can now easily see that P1.7, P2.2, and P2.3 are set to 1 which makes them outputs.
##### HINT:
It is helpful to use |= instead of = because it won’t overwrite bits that are not set to 1 in the mask.

Output pins may be toggled using the PxOUT register. LEDs are turned on by setting their corresponding register bits low.

### Exercise 2

How would be turn on the three LEDs without modifying any other bits in the register?

#### Solution


P1DIR &= ~0x80;
P2DIR &= ~0x0C;


This will turn on all three LEDs assuming they had already been set to be outputs.
##### Note:
~0x0C = 0xF3 = 0b11110011

Since all I/O registers are set as inputs by default we do not have to set the direction of the push buttons. Each time an input is toggled a bit in PxIN will be modified.

### Exercise 3

Write a couple different polling schemes for detecting if BUTTON_1 was pushed.

#### Note:

PxIN bits corresponding to the push buttons are high by default (i.e. the button is not depressed.)

#### Solution

 while(!(P2IN&0x01)); or if (!(P2IN&0x01));

### Exercise 4

Now we will write a program that lights up one of the LEDs and will light up a different LED once BUTTON_2 is pressed. The LED sequence should go as follows: red, green, yellow, repeat.

Create a new project in CrossStudio and make sure you select the correct processor, the MSP430F169.

Include the correct header file by adding the following line at the top of the main.c file.

#include <msp430x16x.h> 

It may be helpful to define some macros for commonly used register values. For example, if we add #define red_on ~0x04 to the top of the file (after the #include) we may call red_on every time we wanted the value ~0x04. Similarly, you may write a function to turn a light on or off.

Complete the program.

#### Solution

      #include <msp430x16x.h>

void main(void)
{
P1DIR |= 0x80;              // Set P1.7 as an output pin
P2DIR |= 0x0C;              // Set P2.2 & P2.3 as output pins

P1OUT |= 0x80;
P2OUT |= 0x0C;              // Turn off all LEDs

while(1){
P1OUT |= 0x80;            // turn off yellow LED
P2OUT &= ~0x04;           // turn on red LED

while(P2IN&0x02);         // waits here while button isn't depressed
while(!(P2IN&0x02));      // waits here while button is pushed in

P2OUT |= 0x04;            // turn off red LED
P2OUT &= ~0x08;           // turn on green LED

while(P2IN&0x02);
while(!(P2IN&0x02));

P2OUT |= 0x08;            // turn off green LED
P1OUT &= ~0x80;           // turn on yellow LED

while((P2IN&0x02));
while(!(P2IN&0x02));
}
}



## Content actions

PDF | EPUB (?)

### What is an EPUB file?

EPUB is an electronic book format that can be read on a variety of mobile devices.

PDF | EPUB (?)

### What is an EPUB file?

EPUB is an electronic book format that can be read on a variety of mobile devices.

#### Collection to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

#### Definition of a lens

##### Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

##### What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

##### Who can create a lens?

Any individual member, a community, or a respected organization.

##### What are tags?

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks

#### Module to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

#### Definition of a lens

##### Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

##### What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

##### Who can create a lens?

Any individual member, a community, or a respected organization.

##### What are tags?

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks