Skip to content Skip to navigation


You are here: Home » Content » Standing Waves and Wind Instruments


Recently Viewed

This feature requires Javascript to be enabled.


(What is a tag?)

These tags come from the endorsement, affiliation, and other lenses that include this content.

Standing Waves and Wind Instruments

Module by: Catherine Schmidt-Jones. E-mail the author

Summary: The musical sounds of aerophones (woodwinds and brass) are created by standing waves in the air inside the instruments.

Note: You are viewing an old version of this document. The latest version is available here.


A wind instrument makes a tone when a standing wave of air is created inside it. In most wind instruments, a vibration that the player makes at the mouthpiece is picked up and amplified and given a pleasant timbre by the air inside the tube-shaped body of the instrument. The shape and length of the inside of the tube give the sound wave its pitch as well as its timbre.

You will find below a discussion of what makes standing waves in a tube, wind instruments and the harmonic series, and the types of tubes that can be used in musical instruments. This is a simplified discussion to give you a basic idea of what's going on inside a wind instrument. I'm avoiding the math and avoiding all the complications - for example, what happens to the wave when there are closed finger holes in the side of the tube. Actually, the physics of what happens inside real wind instruments is so complex that physicists are still studying it, and still don't have all the answers. If you want a more in-depth or more technical discussion, there are some recommendations below.

If you can't follow the discussion below, try starting with Talking About Sound and Music, Frequency, Wavelength, and Pitch, and Transverse and Longitudinal Waves. You may also want to read about the harmonic series.

What Makes the Standing Waves in a Tube

As discussed in Standing Waves and Musical Instruments, instruments produce musical tones by trapping waves of specific lengths in the instrument. It's pretty easy to see why the standing waves on a string can only have certain lengths; since the ends of the strings are held in place, there has to be a node in the wave at each end. But what is it that makes only certain standing waves possible in a tube of air?

To understand that, you'll have to understand a little bit about what makes waves in a tube different from waves on a string. Waves on a string are transverse waves. The string is stretched out in one direction (call it "up and down"), but when it's vibrating, the motion of the string is in a different direction (call it "back and forth"). Take a look at this animation. At the nodes (each end, for example), there is no back and forth motion, but in between the nodes, the string is moving back and forth very rapidly. The term for this back-and-forth motion is displacement. There is no displacement at a node; the most displacement happens at an antinode.

Figure 1
Transverse Motion on a String
Transverse Motion on a String (TransverseNodes.png)

The standing waves of air in a tube are not transverse waves. Like all sound waves, they are longitudinal. So if the tube of air is going in a certain direction (call it "left and right"), the vibrations in the air are going in that same direction (in this case, they are rushing "left and right").

But they are like the waves on a string in some important ways. Since they are standing waves, there are still nodes - in this case, places where the air is not rushing back and forth. And, just as on the string, in between the nodes there are antinodes, where the displacement is largest (the air is moving back and forth the most). And when one antinode is going in one direction (left), the antinodes nearest it will be going in the other direction (right). So, even though what is happening is very different, the end result of standing waves "trapped" in a tube will be very much like the end result of standing waves "trapped" on a string: a harmonic series based on the tube length.

More on that harmonic series in the next section. First, let's talk about why only some standing waves will "fit" in a tube of a particular length. If the tube were closed on both ends, it's easy to see that this would be a lot like the wave on the string. The air would not be able to rush back and forth at the ends, so any wave trapped inside this tube would have to have nodes at each end.


It's very difficult to draw air that is rushing back and forth in some places and standing still in other places, so the figures below show the waves as if they are transverse. But here is an animation that may give you some idea of what is happening in a longitudinal standing wave.

Figure 2: Just like a string held at both ends, a closed tube must have a node at each end.
Fully Closed Tube
Fully Closed Tube (closedtube.png)

Now, a closed tube wouldn't make a very good musical instrument; it wouldn't be very loud. Most of the sound you hear from an instrument is not the standing wave inside the tube; the sound is made at the open ends where the standing waves manage to "leak out" of the tube a little bit. Physicists sometimes study the acoustics of a tube closed at both ends (called a Kundt tube), but most musical instruments have at least one open end. An instrument that is open at both ends may be called open-open, or just an open tube instrument. An instrument that is only open at one end may be called open-closed, or a closed tube or stopped tube instrument (or sometimes semi-closed or half-closed). This is a little confusing, since such instruments (trumpets, for example) still obviously have one open end.

Now, there's nothing stopping the air from rushing back and forth at the open end of the tube. In fact, the waves that "fit" the tube are the ones that have antinodes at the open end, so the air is in fact rushing back and forth there, causing waves (at the same frequency as the standing wave) that are not trapped in the instrument but can go out into the room.

Figure 3: There must be a (displacement) antinode at any open end of a tube.
Open-Open and Open-Closed Tubes
Open-Open and Open-Closed Tubes (opentubes.png)

What is it that requires the waves to have an antinode at an open end? Look again at the animation of what is happening to the air particles in the standing wave. The air at the nodes is not moving back and forth, but it is piling up and spreading out again. So the air pressure is changing a lot at the nodes. But at the antinodes, the air is moving a lot, but it is moving back and forth, not piling up and spreading out. In fact, you can imagine that same wave to be an air pressure wave instead of an air displacement wave. It really is both at the same time, but the pressure wave nodes are at the same place as the displacement antinodes, and the pressure antinodes are at the same place as the displacement nodes.

Figure 4: The nodes of the displacement wave, where the air is not rushing back-and-forth but is doing the most piling-up-and-spreading-out, are the antinodes of the pressure wave. The antinodes of the displacement wave, where the air is rushing back-and-forth the most, but is not piling up or spreading out at all, are the nodes of the pressure wave. Both waves must have exactly the same frequency, of course; they are really two aspects of the same sound wave.
An Air Displacement Wave is also an Air Pressure Wave
An Air Displacement Wave is also an Air Pressure Wave (DisplacementPressureWave.png)

At an open end of the tube, there is nothing to stop the air rushing in and out, and so it does. What the air cannot do at the open end is build up any pressure; there is nothing for the air to build up against, and any drop in pressure will just bring air rushing in from outside the tube. So the air pressure at an open end must remain the same as the air pressure of the room. In other words, that end must have a pressure node (where the air pressure doesn't change) and (therefore) a displacement antinode.


Since being exposed to the air pressure outside the instrument is what is important, the "open end" of a wind instrument, as far as the sound waves are concerned, is the first place that they can escape - the first open hole. This is how woodwinds change the length of the wave, and the pitch of the note. For more on this, please see Wind Instruments – Some Basics.

Harmonic Series in Tubes

As explained in the previous section, the standing waves in a tube must have a (displacement) node at a closed end and an antinode at an open end. In an open-open tube, this leads to a harmonic series very similar to a harmonic series produced on a string that's held at both ends. The fundamental, the lowest note possible in the tube, is the note with a wavelength twice the length of the tube (or string). The next possible note has twice the frequency (half the wavelength) of the fundamental, the next three times the frequency, the next four times, and so on.

Figure 5: These are the first four harmonics allowed in an open tube. Any standing wave with a displacement antinode at both ends is allowed, but the lower harmonics are usually the easiest to play and the strongest harmonics in the timbre.
Allowed Waves in an Open Tube
Allowed Waves in an Open Tube (opentubewavelengths.png)

But things are a little different for the tube that is closed at one end and open at the other. The lowest note that you might be able to get on such a tube (a fundamental that is unplayable on many instruments) has a wavelength four times the length of the tube. (You may notice that this means that a stopped tube will get a note half the frequency - an octave lower - than an open tube of the same length.) The next note that is possible on the half-closed tube has three times the frequency of the fundamental, the next five times,and so on. In other words, a stopped tube can only play the odd-numbered harmonics. But wait; things get even more complicated!

Figure 6: Again, these are the lowest (lowest pitch and lowest frequency) four harmonics allowed. Any wave with a displacement node at the closed end and antinode at the open end is allowed. Note that this means only the odd-numbered harmonics "fit".
Allowed Wavelengths in a Stopped Tube
Allowed Wavelengths in a Stopped Tube (closedtubewavelengths.png)

Basic Wind Instrument Tube Types

The tubes discussed in the previous section were all simple cylinder-shaped tubes. Just as on a string, the actual wave inside the instrument is a complex wave that includes all of those possible harmonics. A cylinder makes a good musical instrument because all the waves in the tube happen to have simple, harmonic-series-type relationships. This becomes very useful when the player overblows in order to get more notes. As mentioned above, woodwind players get different notes out of their instruments by opening and closing finger holes, making the standing wave tube longer or shorter. Once the player has used all the holes, higher notes are played by overblowing, which causes the next higher harmonic of the tube to sound. (Brass players can get many different harmonics from their instruments, and so do not need as many fingerings. Please see harmonic series and Wind Instruments – Some Basics for more on this.)

For most possible tube shapes, a new set of holes would be needed to get notes that are in tune with the lower set of notes. But a couple of shapes, including the cylinder, give higher notes that are basically in tune with the lower notes using the same finger holes (or valves). (Even so, some extra finger holes or an extra slide or valve may be necessary.) Another possible shape is basically not used because it would be difficult to build precisely and unwieldy to play. (Basically, it has to flare rapidly, and flare at a very specific rate. Please see John S. Rigden's Physics and the Sound of Music, as listed below for more on this.)

Figure 7: The two shapes that are useful for real wind instruments are the cylinder and the cone. Most real wind instruments are a combination of cylindrical and conical sections, but most act as (and can be classified as) either cylindrical bore or conical bore instruments.
Figure 7 (bore.png)

The other tube shape that is often used in wind instruments is the cone. In fact, most real wind instruments are tubes that are some sort of combination of cylindrial and conical tubes. But most can be classified as either cylindrical or conical instruments.

The really surprising thing is that stopped-tube instruments that are basically conical act as if they are open-tube cylindrical instruments.


The math showing why this happens has been done, but I will not go into it here. Please see the further reading, below for books with a more rigorous and in-depth discussion of the subject.
Compare, for example, the clarinet and the saxophone, woodwinds with very similar mouthpieces. Both instruments, like any basic woodwind, have enough finger holes and keys to play all the notes within an octave - eleven. To get more notes, a woodwind player overblows, blowing hard enough to sound the next harmonic of the instrument. For the saxophone, a very conical instrument, the next harmonic is the next octave (two times the frequency of the fundamental), and the saxophonist can continue up this next octave by essentially repeating the fingerings for the first octave.

The clarinet player doesn't have it so easy. Because the clarinet is a very cylindrical instrument, the next harmonic available is three times the frequency, or an octave and a fifth higher, than the fundamental. Extra holes and keys have to be added to the instrument to get the notes in that missing fifth, and then even more keys are added to help the clarinetist get around the awkward fingerings that can ensue. In all, eighteen holes are needed, and many notes have several possible fingerings that the player must choose from, to suit the particular situation.

So why bother with cylindrical instruments? Remember that an actual note from any instrument is a very complex sound wave that includes lots of harmonics. The pitch that we hear when a wind instrument plays a note is (usually) the lowest harmonic that is being produced in the tube at the time. The higher harmonics produce the timbre, or sound color, of the instrument. A saxophone-shaped instrument simply can't get that odd-harmonics clarinet sound.

The shapes and sounds of the instruments that are popular today are the result of centuries of trial-and-error experimentation by instrument-makers. Some of them understood something of the physics involved, but the actual physics of real instruments - once you add sound holes, valves, keys, mouthpieces, and bells - are incredibly complex, and theoretical physicists are still studying the subject and making new discoveries.

Further Reading

  • Alexander Wood's The Physics of Music (1944, The Sherwood Press) is a classic which includes both the basics of waves in a pipe and information about specific instruments.
  • John Backus' The Acoustical Foundations of Music (1969, W.W. Norton and Company) also goes into more detail on the physics of specific instruments.
  • John S. Rigden's Physics and the Sound of Music (1977, John Wiley and Sons) includes most of the math necessary for a really rigorous, complete explanation of basic acoustics, but is (in my opinion) still very readable.
  • Arthur H. Benade's Fundamentals of Musical Acoustics is a more technical textbook that gives some idea of how acoustical experiments on instruments are designed and carried out. Those who are less comfortable with the scince/engineering aspect of the subject may prefer the two very thorough articles by Benade in:
  • The Physics of Music (W. H. Freeman and Co.), a collection of readings from the periodical Scientific American.

Content actions

Download module as:

Add module to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

Definition of a lens


A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

Who can create a lens?

Any individual member, a community, or a respected organization.

What are tags? tag icon

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks