OpenStax_CNX

You are here: Home » Content » Information and Signal Theory » Frequency response from a circuit diagram

Lenses

What is a lens?

Definition of a lens

Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

Who can create a lens?

Any individual member, a community, or a respected organization.

What are tags?

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

In these lenses

• Elec Sci lens

This module is included inLens: Electrical Science
By: Andy Mitofsky

Click the "Elec Sci lens" link to see all content selected in this lens.

Recently Viewed

This feature requires Javascript to be enabled.

Inside Collection (Course):

Course by: Anders Gjendemsjø. E-mail the author

Frequency response from a circuit diagram

Module by: Anders Gjendemsjø. E-mail the author

Summary: We obtain the frequency response from a circuit diagram.

In this module we calculate the frequency response from a circuit diagram of a simple analog filter, as shown in Figure 1. We know that the frequency response, denoted by HjΩ H Ω , is calculated as ratio of the output and input voltages (in the frequency domain). That is,

V out V in =HjΩ V out V in H Ω
(1)
Notice that we use capital letters in these relations. This is to indicate that they are frequency domain descriptions.

Now, to calculate the frequency response we find expressions for V in V in , and V out V out , as follows

V in =IR+ V out V in I R V out
(2)
Further, the current in the circuit can be expressed as
I=jCΩ V out I C Ω V out
(3)
Then, the frequency response is given as:
V out V in =HjΩ=1jΩRC+1 V out V in H Ω 1 Ω R C 1
(4)
Note that above we have used impedance considerations. Have a look at The Impedance concept and Impedance for a quick summary of impedance considerations.

Implicit in using the transfer function is that the input is a complex exponential, and the output is also a complex exponential having the same frequency. The transfer function reveals how the circuit modifies the input amplitude in creating the output amplitude. Thus, the transfer function completely describes how the circuit processes the input complex exponential to produce the output complex exponential. The circuit's function is thus summarized by the transfer function. In fact, circuits are often designed to meet transfer function specifications. Because transfer functions are complex-valued, frequency-dependent quantities, we can better appreciate a circuit's function by examining the magnitude and phase of its transfer function (Figure 2). Note that in Figure 2 we plot the magnitude phase as a function of the frequency FF, instead of the angular frequency ΩΩ. Since Ω=2πF Ω 2 F , this is just a matter of taste, see Frequency definitions and peridocity for details.

We can compute the frequency response for both positive and negative frequencies. Recall that sinusoids consist of the sum of two complex exponentials, one having the negative frequency of the other. We will consider how the circuit acts on a sinusoid soon. Do note that the magnitude has even symmetry: The negative frequency portion is a mirror image of the positive frequency portion: |H(jF)|=|HjF| H F H F . The phase has odd symmetry: H(jF)=HjF H F H F . These properties of this specific example apply for all transfer functions associated with circuits. Consequently, we don't need to plot the negative frequency component; we know what it is from the positive frequency part.

The magnitude equals 12 1 2 of its maximum gain (1 at F=0 F 0 ) when 2πFRC=1 2 F R C 1 (the two terms in the denominator of the magnitude are equal). The frequency F c =12πRC F c 1 2 R C defines the boundary between two operating ranges.

• For frequencies below this frequency, the circuit does not much alter the amplitude of the complex exponential source.
• For frequencies greater than F c F c , the circuit strongly attenuates the amplitude. Thus, when the source frequency is in this range, the circuit's output has a much smaller amplitude than that of the source.
For these reasons, this frequency is known as the cutoff frequency. In this circuit the cutoff frequency depends only on the product of the resistance and the capacitance. Thus, a cutoff frequency of 1 kHz occurs when 12πRC=103 1 2 R C 10 3 or RC=1032π=1.59×10-4 R C 10 3 2 1.59-4 . Thus resistance-capacitance combinations of 1.59 kΩ and 100 nF or 10 Ω and 1.59 μF result in the same cutoff frequency.

The phase shift caused by the circuit at the cutoff frequency precisely equals π4 4 . Thus, below the cutoff frequency, phase is little affected, but at higher frequencies, the phase shift caused by the circuit becomes π2 2 . This phase shift corresponds to the difference between a cosine and a sine.

We can use the transfer function to find the output when the input voltage is a sinusoid for two reasons. First of all, a sinusoid is the sum of two complex exponentials, each having a frequency equal to the negative of the other. Secondly, because the circuit is linear, superposition applies. If the source is a sine wave, we know that

v in t=AsinΩt=A2j(ejΩte(jΩt)) v in t A Ω t A 2 Ω t Ω t
(5)
Since the input is the sum of two complex exponentials, we know that the output is also a sum of two similar complex exponentials, the only difference being that the complex amplitude of each is multiplied by the transfer function evaluated at each exponential's frequency.
v out t=A2jHjΩejΩtA2jH(jΩ)e(jΩt) v out t A 2 H Ω Ω t A 2 H Ω Ω t
(6)
As noted earlier, the transfer function is most conveniently expressed in polar form: HjΩ=|HjΩ|ejHjΩ H Ω H Ω H Ω . Furthermore, |H(jΩ)|=|HjΩ| H Ω H Ω (even symmetry of the magnitude) and H(jΩ)=HjΩ H Ω H Ω (odd symmetry of the phase). The output voltage expression simplifies to
v out t=A|HjΩ|sinΩt+HjΩ=A2j|HjΩ|ejΩt+HjΩA2j|HjΩ|e((jΩt))HjΩ v out t A H Ω Ω t H Ω A 2 H Ω Ω t H Ω A 2 H Ω Ω t H Ω
(7)
The circuit's output to a sinusoidal input is also a sinusoid, having a gain equal to the magnitude of the circuit's transfer function evaluated at the source frequency and a phase equal to the phase of the transfer function at the source frequency. It will turn out that this input-output relation description applies to any linear circuit having a sinusoidal source.

The notion of impedance arises when we assume the sources are complex exponentials. This assumption may seem restrictive; what would we do if the source were a unit step? When we use impedances to find the transfer function between the source and the output variable, we can derive from it the differential equation that relates input and output. The differential equation applies no matter what the source may be. As we have argued, it is far simpler to use impedances to find the differential equation (because we can use series and parallel combination rules) than any other method. In this sense, we have not lost anything by temporarily pretending the source is a complex exponential.

In fact we can also solve the differential equation using impedances! Thus, despite the apparent restrictiveness of impedances, assuming complex exponential sources is actually quite general.

Content actions

PDF | EPUB (?)

What is an EPUB file?

EPUB is an electronic book format that can be read on a variety of mobile devices.

Collection to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

Definition of a lens

Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

Who can create a lens?

Any individual member, a community, or a respected organization.

What are tags?

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks

Module to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

Definition of a lens

Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

Who can create a lens?

Any individual member, a community, or a respected organization.

What are tags?

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks