# Connexions

You are here: Home » Content » Understanding acceleration

### Recently Viewed

This feature requires Javascript to be enabled.

# Understanding acceleration

Module by: Sunil Kumar Singh. E-mail the author

Summary: Acceleration exists where net external force exists. The acceleration of an object is determined by the mass of the object and net external force applied. Most important aspect of acceleration is that it is independent of motion i.e. velocity.

The relationship among velocity, acceleration and force is central to the study of mechanics. Text book treatment normally divides the scope of study between kinematics (study of velocity and acceleration) and dynamics (study of acceleration and force). This approach is perfectly fine till we do not encounter some inherent problem as to the understanding of the subject matter.

One important short coming of this approach is that we tend to assume that acceleration depends on the state of motion i.e. velocity. Such inference is not all too uncommon as acceleration is defined in terms of velocities. Now the question is “Does acceleration actually depend on the velocity?”

There are many other such inferences that need to be checked. Following paragraphs investigate these fundamental issues in detail and enrich our understanding of acceleration.

## Velocity, acceleration and force

Acceleration is related to external force. This relationship is given by Newton’s second law of motion. For a constant mass system,

F = m a F = m a

In words, Newton’s second law states that acceleration (effect) is the result of the application of net external force (cause). Thus, the relationship between the two quantities is that of cause and effect. Further, force is equal to the product of a scalar quantity, m, and a vector quantity, a, implying that the direction of the acceleration is same as that of the net force. This means that acceleration is though the measurement of the change of velocity, but is strictly determined by the external force and the mass of the body; and expressed in terms of “change of velocity” per unit time.

If we look around ourselves, we find that force modifies the state of motion of the objects. The immediate effect of a net force on a body is that the state of motion of the body changes. In other words, the velocity of the body changes in response to the application of net force. Here, the word “net” is important. The motion of the body responds to the net or resultant force. In this sense, acceleration is mere statement of the effect of the force as measurement of the rate of change of the velocity with time.

Now, there is complete freedom as to the magnitude and direction of force being applied. From our real time experience, we may substantiate this assertion. For example, we can deflect a foot ball, applying force as we wish (in both magnitude and direction). The motion of the ball has no bearing on how we apply force. Simply put : the magnitude and direction of the force (and that of acceleration) is not dependent on the magnitude and direction of the velocity of the body.

In the nutshell, we conclude that force and hence acceleration is independent of the velocity of the body. The magnitude and direction of the acceleration is determined by the magnitude and direction of the force and mass of the body. This is an important clarification.

To elucidate the assertion further, let us consider parabolic motion of a ball as shown in the figure. The important aspect of the parabolic motion is that the acceleration associated with motion is simply ‘g’ as there is no other force present except the force of gravity. The resultant force and mass of the ball together determine acceleration of the ball.

### Example 1: Acceleration

Problem : If the tension in the string is T, when the string makes an angle θ with the vertical. Find the acceleration of a pendulum bob, having a mass “m”.

Solution : As pointed out in our discussion, we need not study or consider velocities of bob to get the answer. Instead we should strive to know the resultant force to find out acceleration, using Newton’s second law of motion.

The forces, acting on the bob, are (i) force of gravity, mg, acting in the downward direction and (ii) Tension, T, acting along the string. Hence, the acceleration of the bob is determined by the resultant force, arising from the two forces.

Using parallelogram theorem for vector addition, the resultant force is :

F = { m 2 g 2 + T 2 + 2 m g T cos ( 180 ° - θ ) } = ( m 2 g 2 + T 2 + 2 m g T cos θ ) F = { m 2 g 2 + T 2 + 2 m g T cos ( 180 ° - θ ) } = ( m 2 g 2 + T 2 + 2 m g T cos θ )

The acceleration is in the direction of force as shown in the figure, whereas the magnitude of the acceleration, a, is given by :

a = ( m 2 g 2 + T 2 + 2 m g T cos θ ) m a = ( m 2 g 2 + T 2 + 2 m g T cos θ ) m

## External force and possible scenarios

The change in velocity, resulting from the application of external force, may occur in magnitude or direction or both.

1: When force is applied in a given direction and the object is stationary.

Under this situation, the magnitude of velocity increases with time, while the body follows a linear path in the direction of force (or acceleration).

2: When force is applied in the direction of the motion, then it increases the magnitude of the velocity without any change in the direction.

Let us consider a block sliding on a smooth incline surface as shown in the figure. The component of the force due to gravity applies in the direction of motion. Under this situation, the magnitude of velocity increases with time, while the body follows a linear path. There is no change in the direction of motion.

3: When force is applied in the opposite direction to the motion, then it decreases the magnitude of the velocity without any change in the direction.

Take the example of a ball thrown vertically in the upward direction with certain velocity. Here, force due to gravity is acting downwards. The ball linearly rises to the maximum height till the velocity of ball reduces to zero.

During upward motion, we see that the force acts in the opposite direction to that of the velocity. Under this situation, the magnitude of velocity decreases with time, while the body follows a linear path. There is no change in the direction of motion.

The velocity of the object at the point, where motion changes direction, is zero and force is acting downwards. This situation is same as the case 1. The object is at rest. Hence, object moves in the direction of force i.e. in the downward direction.

In the figure above, the vectors drawn at various points represent the direction and magnitude of force (F), acceleration (a) and velocity (v) during the motion. Note that both force and acceleration act in the downward direction during the motion.

4: When force is applied perpendicular to the direction of motion, then it causes change in the direction of the velocity.

A simple change of direction also constitutes change in velocity and, therefore, acceleration. Consider the case of a uniform circular motion in which a particle moves along a circular path at constant speed “v”. Let v 1 v 1 and v 2 v 2 be the velocities of the particle at two time instants, then

| v 1 | = | v 2 | = a constant | v 1 | = | v 2 | = a constant

In the adjoining figure, the vector segments OC and OD represent v 1 v 1 and v 2 v 2 . Knowing that vector difference Δv is directed from initial to final position, it is represented by vector CD. Using the adjoining vector triangle,

OC + CD = OD v = CD = v 2 - v 1 OC + CD = OD v = CD = v 2 - v 1

The important thing to realize here is that direction of Δ v is along CD, which is directed towards the origin. This result is in complete agreement of what we know about uniform circular motion (The topic of uniform circular motion is covered in separate module). We need to apply a force (causing acceleration to the moving particle) across (i.e. perpendicular) to the motion to change direction. If the force (hence acceleration) is perpendicular to velocity, then magnitude of velocity i.e. speed remains same, whereas the direction of motion keeps changing.

### Example 2: Acceleration

Problem : An object moves along a quadrant AB of a circle of radius 10 m with a constant speed 5 m/s. Find the average velocity and average acceleration in this interval.

Solution : Here, we can determine time interval form the first statement of the question. The particle covers a distance of 2πr/4 with a speed v. Hence, time interval,

t = distance speed = 2 π r 4 v = 3.14 x 10 2 x 5 = 3.14 s t = distance speed = 2 π r 4 v = 3.14 x 10 2 x 5 = 3.14 s

Magnitude of average velocity is given by the ratio of the magnitude of displacement and time :

| v avg | = = | AB | Time = ( 10 2 + 10 2 ) 3.14 14.14 3.14 = 4.5 m / s | v avg | = = | AB | Time = ( 10 2 + 10 2 ) 3.14 14.14 3.14 = 4.5 m / s

Average velocity is directed along vector AB i.e. in the direction of displacement vector.

Magnitude of average acceleration is given by the ratio :

a avg = = | Δ v | Δ t a avg = = | Δ v | Δ t

Here,

| Δ v | = | v 2 - v 1 | | Δ v | = ( 5 2 + 5 2 ) = 5 2 m / s a avg = 5 2 3.14 = 3.1 m / s 2 | Δ v | = | v 2 - v 1 | | Δ v | = ( 5 2 + 5 2 ) = 5 2 m / s a avg = 5 2 3.14 = 3.1 m / s 2

Average acceleration is directed along the direction of vector v 2 - v 1 v 2 - v 1 i.e. directed towards the center of the circle (as shown in the figure).

5: When force is applied at a certain angle with the motion, then it causes change in both magnitude and direction of the velocity. The component of force in the direction of motion changes its magnitude (an increase or decrease), while the component of force perpendicular to the direction of motion changes its direction.

The motion of a small spherical mass “m”, tied to a fixed point with the help of a string illustrates the changes taking place in both the direction and magnitude of the velocity. Saving the details for discussion at a later point in the course, here tension in the string and tangential force provide for the change in the direction and magnitude of velocity respectively.

When the string makes at angle, θ, with the vertical, then :

(a) Tension in the string, T is :

T = mg cos θ T = mg cos θ

This force acts normal to the path of motion at all points and causes the body to continuously change its direction along the circular path. Note that this force acts perpendicular to the direction of velocity, which is along the tangent at any given point on the arc.

(b) Tangential force, F, is :

F = mg sin θ F = mg sin θ

This force acts tangentially to the path and is in the direction of velocity of the spherical mass, which is also along the tangent at that point. As the force and velocity are in the same direction, this force changes the magnitude of velocity. The magnitude of velocity increases when force acts in the direction of velocity and magnitude of velocity decreases when force acts in the opposite direction to that of velocity.

## Content actions

PDF | EPUB (?)

### What is an EPUB file?

EPUB is an electronic book format that can be read on a variety of mobile devices.

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

#### Definition of a lens

##### Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

##### What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

##### Who can create a lens?

Any individual member, a community, or a respected organization.

##### What are tags?

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks