Skip to content Skip to navigation

Connexions

You are here: Home » Content » Force analysis in accelerated frame (check your understanding)

Navigation

Recently Viewed

This feature requires Javascript to be enabled.

Force analysis in accelerated frame (check your understanding)

Module by: Sunil Kumar Singh. E-mail the author

User rating (How does the rating system work?)
Ratings

Ratings allow you to judge the quality of modules. If other users have ranked the module then its average rating is displayed below. Ratings are calculated on a scale from one star (Poor) to five stars (Excellent).

How to rate a module

Hover over the star that corresponds to the rating you wish to assign. Click on the star to add your rating. Your rating should be based on the quality of the content. You must have an account and be logged in to rate content.

:
(0 ratings)

Summary: Objective questions, contained in this module with hidden solutions, help improve understanding of the topics covered under the module "Force analysis in accelerated frame".

Note: Your browser may not currently support MathML. See our browser support page for additional details. You can always view the correct math in the PDF version.

The questions have been selected to enhance understanding of the topics covered in the module titled " Force analysis in accelerated frame ". All questions are multiple choice questions with one or more correct answers.

Each of the questions is provided with solution. However, it is recommended that solutions may be seen only when your answers do not match with the ones given at the end of this module.

Force analysis in accelerated frame

Exercise 1

What is the weight of a person of mass “m”, standing in a lift, which is accelerating upward with acceleration “a”.

(a) m g (b) m ( a + g ) (c) m ( a - g ) (d) m ( g - a ) (a) m g (b) m ( a + g ) (c) m ( a - g ) (d) m ( g - a )

Solution

The weight of a body is defined as the product of mass and acceleration due to gravitational force. It means that weight of a body is simply equal to the gravitational pull (force) on the body. Since acceleration due to gravity is “g” in the lift (whether accelerating or not), the weight of the person is “mg”. The weight of the person does not change - though the net force on the person has changed.

What is meant here that terms such as “lesser weight”, “greater weight” or “weightlessness” in accelerated motion, are actually loose expressions. These are states, corresponding to change in the “net force” and not the change in the “weight”. The weight remains “mg”.

Strictly speaking, we must use relative terms of weight, only if gravitational force on the body has changed. In accelerated motion, we can, however, be not incorrect to say that we experience the “feeling” of weightlessness or lesser or greater weight.

Hence, option (a) is correct.

Exercise 2

A spring balance in an accelerating lift records 30 N for a block of mass 5 kg. It means that :

(a) lift is moving up with increasing speed

(b) lift is moving up with decreasing speed

(c) lift is moving down with increasing speed

(d) lift is moving down with decreasing speed

Solution

The weight of the block is mg = 5 x 10 = 50 N. Since spring balance records lesser weight, it means that spring force (F) is less than the weight of the block. It means that lift is accelerating in downward direction such that :

Figure 1
Free body diagram
 Free body diagram  (afq6.gif)

F y = m g - F = m a F = m ( g - a ) F y = m g - F = m a F = m ( g - a )

An acceleration in downward direction means :

(i) lift is moving down with increasing speed

(ii) lift is moving up with decreasing speed

Hence, options (b) and (c) are correct.

Exercise 3

A person jumps off from a wall of height “h” with a small box of mass “m” on his head. What is the normal force applied by the box on his head during the fall?

(a) m g (b) m ( a + g ) (c) m ( a - g ) (d) zero (a) m g (b) m ( a + g ) (c) m ( a - g ) (d) zero

Solution

The motion of the box takes place in relation to the person, who is accelerating down with acceleration “g”. Here, we analyze the problem in the inertial frame of the ground. The forces on the box are (i) its weight, "mg", acting downward and (ii) normal force, "N", acting downward. As the bodies are falling freely under the gravity, the acceleration of each of them is equal to "g" i.e. acceleration due to gravity.

Now, the free body diagram of the box is shown in the figure.

Figure 2
Free body diagram
 Free body diagram  (afq1.gif)

F y = m g - N = m a N = m ( g - a ) F y = m g - N = m a N = m ( g - a )

As a = g,

N = m ( g - g ) = 0 N = m ( g - g ) = 0

Alternatively, we can analyze the situation in the non-inertial frame of person, who is falling freely under gravity. In this non-inertial reference, box is stationary. The forces on the box in this reference are (i) weight of box, "mg", acting downward (ii) normal force, "N", acting upward and (iii) pseudo force, "mg", applied in the upward direction opposite to the direction of acceleration of the frame of reference.

F y = N + m g - m g = 0 N = 0 F y = N + m g - m g = 0 N = 0

Hence, option (d) is correct.

Exercise 4

A lift is descending with acceleration 3 m / s 2 m / s 2 as shown in the figure. If the mass of the block “A” is 1 kg, then the normal force (in Newton) applied by block “A” on block “B” is :

Figure 3
Motion in accelerated lift
 Motion in accelerated lift  (afq2.gif)

(a) 3 (b) 5 (c) 7 (d) 9 (a) 3 (b) 5 (c) 7 (d) 9

Solution

It is convenient to carry out force analysis of block “A”. For, it is acted by only two forces as compared to three forces for block “B”. Since normal forces are equal and opposite in accordance with Newton’s third law, it is same whether we determine normal force with respect to “A” or “B”.

Free body diagram of “A” Free body diagram of “A”

Figure 4
Free body diagram
 Free body diagram  (afq3.gif)

F y = m g - N = m a N = m ( g - a ) N = 1 x ( 10 - 3 ) = 7 Newton F y = m g - N = m a N = m ( g - a ) N = 1 x ( 10 - 3 ) = 7 Newton

Alternatively, using the reference of lift, the forces on the block "A" are (i) its weight, "mg", acting downward (ii) Normal force, "N", acting upward and (iii) pseudo force "ma" acting upwards in the direction opposite to that of the acceleration of the lift. In this non-inertial frame, however, the block is stationary. Hence,

F y = N + m a - m g = 0 N = m ( g - a ) N = 1 x ( 10 - 3 ) = 7 Newton F y = N + m a - m g = 0 N = m ( g - a ) N = 1 x ( 10 - 3 ) = 7 Newton

Hence, option (c) is correct.

Exercise 5

A lift of height 2.4 m, starting with zero velocity, is accelerating at 2 m / s 2 m / s 2 in upward direction. A ball of 0.1 kg is dropped from the ceiling of the lift, the moment lift starts its motion. The time taken (in second) by the ball to hit the floor is (consider g = 10 m / s 2 m / s 2 ) :

(a) 2 (b) 0.27 (c) 0.63 (d) 0.72 (a) 2 (b) 0.27 (c) 0.63 (d) 0.72

Solution

The motion of the ball (say A) is not taking place in contact with lift. The moment it is let go, the only force on the ball is due to gravity. The question, therefore, reduces to motions of two objects, which are moving towards each other to cover a linear distance of 2.4 m, starting with zero speeds. Considering downward direction as positive, the relative acceleration of the ball (A) with respect to lift floor (B) is :

a AB = a A - a B a AB = 10 - ( - 2 ) = 12 m / s 2 a AB = a A - a B a AB = 10 - ( - 2 ) = 12 m / s 2

Now applying equation for constant acceleration with initial velocity zero,

y = 1 2 a t 2 2.4 = 1 2 x 12 x t 2 t 2 = 4.8 12 = 0.4 t = 0.63 s y = 1 2 a t 2 2.4 = 1 2 x 12 x t 2 t 2 = 4.8 12 = 0.4 t = 0.63 s

Hence, option (c) is correct.

Exercise 6

A block hangs from a spring balance in a lift, which is accelerating up at 2 m / s 2 m / s 2 . The balance reads 48 N. Then, the mass of the block (in kg) is (consider g = 10 m / s 2 m / s 2 ) :

(a) 1 (b) 2 (c) 3 (d) 4 (a) 1 (b) 2 (c) 3 (d) 4

Solution

The balance reads the spring force. The free body diagram is :

Figure 5
Free body diagram
 Free body diagram  (afq5.gif)

F y = N - m g = m a N = m ( a + g ) m = 48 ( 2 + 10 ) = 4 kg F y = N - m g = m a N = m ( a + g ) m = 48 ( 2 + 10 ) = 4 kg

Hence, option (d) is correct.

Answers


1. (a)     2. (b) and (c)   3. (d)    4. (c)    5. (c)    6. (d)      

Content actions

Give Feedback:

E-mail the module author | Rate module ( How does the rating system work?)

Rating system

Ratings

Ratings allow you to judge the quality of modules. If other users have ranked the module then its average rating is displayed below. Ratings are calculated on a scale from one star (Poor) to five stars (Excellent).

How to rate a module

Hover over the star that corresponds to the rating you wish to assign. Click on the star to add your rating. Your rating should be based on the quality of the content. You must have an account and be logged in to rate content.

(0 ratings)

Download:

Add module to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections directly in Connexions. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need a Connexions account to use 'My Favorites'.

| A lens (?)

Definition of a lens

Lenses

A lens is a custom view of Connexions content. You can think of it as a fancy kind of list that will let you see Connexions through the eyes of organizations and people you trust.

What is in a lens?

Lens makers point to Connexions materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

Who can create a lens?

Any individual Connexions member, a community, or a respected organization.

What are tags? tag icon

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks