# Connexions

You are here: Home » Content » Physics for K-12 » Second law of motion in angular form

• Why yet another course in physics?
• What is physics?

### Recently Viewed

This feature requires Javascript to be enabled.

Inside Collection (Course):

Course by: Sunil Kumar Singh. E-mail the author

# Second law of motion in angular form

Module by: Sunil Kumar Singh. E-mail the author

Summary: Law of motion in angular form is a general law - not limited to linear or rotational motion. It is just that application of this form of law suits best to rotation that we tend to associate the law with rotational motion only.

The heading of this module (law of motion in angular form - not law of motion in rotational form) points to the subtle difference about angular quantities as applicable to general motion vis-a-vis rotation. The title also indicates that law of motion in angular form is just yet another form of Newton's law - not specific to any particular type of motion. What it means that we can use angular concepts and angular law (including the one being developed here) to even pure translational motion along a straight line.

In earlier module titled Rotation of rigid body , we wrote Newton's second law for rotation as :

τ = I α τ = I α
(1)

This relation is evidently valid for rotation, which involves circular motion of particles constituting the rigid body or that of a particle in a plane perpendicular to a fixed axis of rotation. This is so because, moment of inertia is defined with rotational motion only. It is evident that we can not use this form of Newton's second law for any other motion.

In this module, we shall develop the form of Newton's law, which is based on the concept of angular momentum of a particle about a fixed point in the coordinate reference. The law so derived, ofcourse, will then be shown to yield the version of Newton's second law for rotation, which is a special case.

## Newton's second law for a particle in general motion

It was stated in the previous module that angular momentum is defined such that its first time derivative gives torque on the particle. This condition was specified keeping in mind about Newton's second law for translation. Following the logic, let us consider angular momentum of a moving particle moving with respect to a point and find whether first derivative actually yields torque as expected or not?

Angular momentum of the particle about the origin of the coordinate system is :

= r x p = m ( r x v ) = r x p = m ( r x v )
(2)

The "r" and "v" vectors represent position and velocity vectors respectively as shown in the figure. Taking differentiation of the terms with respect to time, we have :

t = t { m ( r x v ) } t = t { m ( r x v ) }

For constant mass,

t = m t ( r x v ) t = m t ( r x v )

t = m ( r x v t + r t x v ) t = m ( r x v t + r t x v )

By definition, the first time derivative of velocity is the acceleration and first time derivative of position vector is the velocity of the particle. Putting the appropriate terms for these quantities,

t = m ( r x a + v x v ) t = m ( r x a + v x v )

But, the vector product of a vector with itself is equal to zero as sinθ = sin0° = 0. Hence,

t = m ( r x a ) t = m ( r x a )

Rearranging, we have :

t = r x m a = r x F t = r x m a = r x F

Indeed the first derivative of angular momentum equals the toque on the particle as expected. Since force on the particle is external force, we can qualify the above relation that first time derivative of angular momentum equals external torque applied on the particle. Next, we should think about a situation when more than one force acts on the particle. According to Newton's second law in translation, we have :

F net = m a F net = m a

Substituting the same in the equation above, we have :

t = r x m a = r x F net = r x F i t = r x m a = r x F net = r x F i

We note here that all forces are acting at the same point (occupied by the particle). As such, position vectors for all forces are same. Thus, we can enclose the vector product inside the summation sign,

t = r x F i = t i = t net t = r x F i = t i = t net

t net = t t net = t
(3)

In words, Newton's second law of motion for a particle in angular form is read as :

Definition 1: Newton's second law of motion in angular form
The net torque on a particle is equal to the time rate of change of its angular momentum.

### Example 1

Problem : Consider projectile motion of a particle of mass "m" and show that time derivative of angular moment about point of projection is equal to torque on the particle about that point.

Solution : For this question, we express various vector quantities in terms of unit vectors, because two directions involved in projectile motion i.e. horizontal and vertical are mutually perpendicular. This makes it easy to represent vectors in the unit vector form.

For the problem in hand, we consider horizontal and vertical directions as "x" and "y" reference directions respectively. Now, the torque, τ, on the particle about the point of projection "O" is :

τ = r x F τ = r x F

The position vector of the position of the projectile at a given time "t" is :

r = x i + y j r = x i + y j

We note here that the external force on the projectile is force due to gravity. Hence,

F = - mg j F = - mg j

Putting in the equation of the torque, we have :

t = ( x i + y j ) x - mg j t = ( x i + y j ) x - mg j

t = - x mg k t = - x mg k

Negative sign shows that torque is clockwise i.e. into the plane of the projection "xy" plane. Next, we evaluate torque about "O" in terms of angular momentum. Here, angular momentum is given as :

= m ( r x v ) = m { ( x i + y j ) ) x v = m ( r x v ) = m { ( x i + y j ) ) x v

Differentiating with respect to time "t", we have :

t = t = m { ( x t i + x t j ) ) x v t t = t = m { ( x t i + x t j ) ) x v t

But v t v t is equal to acceleration. In the case of projectile, acceleration due to gravity is the acceleration of the projectile,

a = v t = - g j a = v t = - g j

Putting this value in the equation,

t = m { ( x t i + x t j ) ) x - g j t = m { ( x t i + x t j ) ) x - g j

t = - x mg k t = - x mg k

The quantities torque and angular momentum are both measured or calculated about a common point "O". If it is not so, then the relationship is not valid. This aspect should always be kept in mind while applying the law.

We have emphasized that the angular form of Newton's second law is defined about a point - not an axis and as such not limited to rotational motion. Hence, we can employ this law even in situation where motion is strictly along a straight line. We shall, as a matter of fact, work out an example to illustrate this.

### Example 2

Problem : A bunjee jumper of mass 60 kg jumps from the middle of a bridge 200 m in length. Find the torque as time derivative of angular momentum about a point "O" as shown in the figure, before the rope attached to the jumper becomes taught.

Solution : Initially, the jumper is at a horizontal distance of 100 m from the end of the bridge. We must observe here that the jumper is not tied to the bridge. The rope is loose during the fall. He or she falls through a vertical straight path. It is a linear motion for which we are required to calculate torque. It is also evident that we can treat the jumper as point mass as all body parts are moving with same motion.

Now, angular momentum of the jumper with respect to the point, O, is :

= m r v sin θ = m r v sin θ

Here, r sinθ = L/2, where "L" is the length of the brifge.

= m v L 2 = m v L 2

However, we do not know the speed of the jumper. We note here that the force on the jumper is force due to gravity. He/she falls with a constant acceleration. Thus, applying equation of motion, speed of the jumper after time "t" is :

v = u + a t = 0 + g t = g t v = u + a t = 0 + g t = g t

Substituting in the equation above :

= m g t L 2 = m g t L 2

Differentiating with respect to time,

τ = t = m g L 2 = 60 x 10 x 200 2 = 60000 N - m τ = t = m g L 2 = 60 x 10 x 200 2 = 60000 N - m

In a similar situation in the earlier module titled Angular momentum , we had found that a particle moving in a straight line parallel to one of the axes of coordinate system has constant angular momentum and zero torque. The difference has arisen as velocity was constant in that case, whereas velocity is not constant in this case. We need force (hence torque) to cause acceleration or deceleration. The result, therefore, is consistent with the basic percept of Newton's law.

Further, we can also calculate torque using relation τ = r x F τ = r x F , where F = mg. This relation should also give same result.

## Newton's second law for a particle in rotation

Newton's law for a particle in rotation is established by taking first derivative of the angular momentum of a particle about an axis of rotation. As derived in previous module titled Angular momentum . it is given by :

= I ω = I ω
(4)

Differentiating with respect to time,

t net = t = ( ) t t net = t = ( ) t

Since particle moves around a circular path of a constant radius, I = m r 2 I = m r 2 is a constant and the same can be taken out of differentiation,

t net = ( ) t = I ( ) t = I α t net = ( ) t = I ( ) t = I α
(5)

This derivation underlines that the above relation is specific to rotation about an axis - not for general motion. On the other hand, the definition of torque as the time rate of angular momentum about a point is a general form of Newton's second law.

## Summary

Since discussion for angular momentum and corresponding Newton's second law are considered for different situations, it would be of great help to summarize the main results and special points for each of the cases so far covered. For clarity, we summarize as follows :

### General motion of a particle

1: The reference for measurement of various angular quantities is a fixed point in the coordinate system. All angular quantities are measured about the same point.

2: Angular momentum of a particle in motion is given as :

= r x p = m ( r x v ) = r x p = m ( r x v )

3: Newton's second law of motion in angular form for a particle is expressed mathematically as :

t net = t t net = t

In particular we must note that the form of Newton's second expressed in terms of moment of inertia and angular acceleration is not valid for general motion. It is so because, moment of inertia is defined about an axis - not about a point. For this reason, we shall not use the following form for general motion,

t net = I α t net = I α

### Rotational motion of a particle

1: For rotational motion, the reference for measurement of various angular quantities is a fixed axis of rotation. All angular quantities are measured about the same axis of rotation.

2: Angular momentum of a particle in motion is given as :

= r p = m r v = m r x ω r = m r 2 ω = I ω = r p = m r v = m r x ω r = m r 2 ω = I ω

where "I" and "ω" denote moment of inertia and angular velocity respectively. Here, " r r " is moment arm about the axis of rotation.

Since there are only two directions invoved (one in the direction of axis and other opposite to it), it is possible to represent the directional features of angular quantities in rotation with a preceding "plus" or "minus" sign for anti-clockwise and clockwise rotational motions respectively. This is also the reason why do we write equations of rotation in scalar form.

3: Newton's second law of motion is expressed mathematically as :

t net = t = I α t net = t = I α

## Content actions

PDF | EPUB (?)

### What is an EPUB file?

EPUB is an electronic book format that can be read on a variety of mobile devices.

PDF | EPUB (?)

### What is an EPUB file?

EPUB is an electronic book format that can be read on a variety of mobile devices.

#### Collection to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

#### Definition of a lens

##### Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

##### What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

##### Who can create a lens?

Any individual member, a community, or a respected organization.

##### What are tags?

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks

#### Module to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

#### Definition of a lens

##### Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

##### What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

##### Who can create a lens?

Any individual member, a community, or a respected organization.

##### What are tags?

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks