Skip to content Skip to navigation Skip to collection information

OpenStax-CNX

You are here: Home » Content » Principles of Digital Communications » Introduction to ISI

Navigation

Table of Contents

Recently Viewed

This feature requires Javascript to be enabled.
 

Introduction to ISI

Module by: Ha Ta-Hong, Tuan Do-Hong. E-mail the authorsEdited By: Ha Ta-Hong, Tuan Do-HongTranslated By: Ha Ta-Hong, Tuan Do-Hong

A typical baseband digital system is described in Figure 1(a). At the transmitter, the modulated pulses are filtered to comply with some bandwidth constraint. These pulses are distorted by the reactances of the cable or by fading in the wireless systems. Figure 1(b) illustrates a convenient model, lumping all the filtering into one overall equivalent system transfer function.

H ( f ) = H t ( f ) . H c ( f ) . H r ( f ) H ( f ) = H t ( f ) . H c ( f ) . H r ( f ) size 12{H \( f \) =H rSub { size 8{t} } \( f \) "." H rSub { size 8{c} } \( f \) "." H rSub { size 8{r} } \( f \) } {}

Figure 1: Intersymbol interference in the detection process. (a) Typical baseband digital system. (b) Equivalent model
Figure 1 (graphics1.png)

Due to the effects of system filtering, the received pulses can overlap one another as shown in Figure 1(b). Such interference is termed InterSymbol Interfernce (ISI). Even in the absence of noise, the effects of filtering and channel-induced distortion lead to ISI.

Nyquist investigated and showed that theoretical minimum system bandwidth needed in order to detect RsRs size 12{R rSub { size 8{s} } } {} symbols/s, without ISI, is Rs/2Rs/2 size 12{R rSub { size 8{s} } /2} {} or 1/2T1/2T size 12{1/2T} {} hertz. For baseband systems, when H(f)H(f) size 12{H \( f \) } {} is such a filter with single-sided bandwidth 1/2T1/2T size 12{1/2T} {} (the ideal Nyquist filter) as shown in figure 2a, its impulse response is of the form h(t)=sinc(t/T)h(t)=sinc(t/T) size 12{h \( t \) ="sin"c \( t/T \) } {}, shown in figure 2b. This sinc(t/T)sinc(t/T) size 12{"sin"c \( t/T \) } {}-shaped pulse is called the ideal Nyquist pulse. Even though two successive pulses h(t)h(t) size 12{h \( t \) } {} and h(tT)h(tT) size 12{h \( t - T \) } {} with long tail, the figure shows all tail of h(t)h(t) size 12{h \( t \) } {} passing through zero amplitude at the instant when h(tT)h(tT) size 12{h \( t - T \) } {} is to be sampled. Therefore, assuming that the synchronization is perfect, there will be no ISI.

Figure 2: Nyquist channels for zero ISI. (a) Rectangular system transfer function H(f). (b) Received pulse shape h(t)=sinc(t/T)h(t)=sinc(t/T) size 12{h \( t \) ="sin"c \( t/T \) } {}
Figure 2 (graphics2.png)

Figure 2 Nyquist channels for zero ISI. (a) Rectangular system transfer function H(f). (b) Received pulse shape h(t)=sinc(t/T)h(t)=sinc(t/T) size 12{h \( t \) ="sin"c \( t/T \) } {}

The names "Nyquist filter" and "Nyquist pulse" are often used to describe the general class of filtering and pulse-shaping that satisfy zero ISI at the sampling points. Among the class of Nyquist filters, the most popular ones are the raised cosine and root-raised cosine.

A fundamental parameter for communication system is bandwidth efficiency, R/WR/W size 12{R/W} {} bits/s/Hz. For ideal Nyquist filtering, the theoretical maximum symbol-rate packing without ISI is 2symbols/s/Hz2symbols/s/Hz size 12{2 ital "symbols"/s/ ital "Hz"} {}. For example, with 64-ary PAM, M=64=26M=64=26 size 12{M="64"=2 rSup { size 8{6} } } {} amplitudes, the theoretical maximum bandwidth efficiency is possible without ISI is 6bits/symbol.2symbols/s/Hz=12bits/s/Hz6bits/symbol.2symbols/s/Hz=12bits/s/Hz size 12{6 ital "bits"/ ital "symbol" "." 2 ital "symbols"/s/ ital "Hz"="12" ital "bits"/s/ ital "Hz"} {}.

Collection Navigation

Content actions

Download:

Collection as:

PDF | EPUB (?)

What is an EPUB file?

EPUB is an electronic book format that can be read on a variety of mobile devices.

Downloading to a reading device

For detailed instructions on how to download this content's EPUB to your specific device, click the "(?)" link.

| More downloads ...

Module as:

PDF | More downloads ...

Add:

Collection to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

Definition of a lens

Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

Who can create a lens?

Any individual member, a community, or a respected organization.

What are tags? tag icon

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks

Module to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

Definition of a lens

Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

Who can create a lens?

Any individual member, a community, or a respected organization.

What are tags? tag icon

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks