Skip to content Skip to navigation

Connexions

You are here: Home » Content » Small-Scale Fading

Navigation

Recently Viewed

This feature requires Javascript to be enabled.

Small-Scale Fading

Module by: Thanh Do-Ngoc, Tuan Do-Hong. E-mail the authors

User rating (How does the rating system work?)
Ratings

Ratings allow you to judge the quality of modules. If other users have ranked the module then its average rating is displayed below. Ratings are calculated on a scale from one star (Poor) to five stars (Excellent).

How to rate a module

Hover over the star that corresponds to the rating you wish to assign. Click on the star to add your rating. Your rating should be based on the quality of the content. You must have an account and be logged in to rate content.

:
(0 ratings)

Note: Your browser may not currently support MathML. See our browser support page for additional details. You can always view the correct math in the PDF version.

SMALL - SCALE FADING

Small-scale fading refers to the dramatic changes in signal amplitude and phase that can be experienced as a result of small changes (as small as half wavelength) in the spatial position between transmitter and receiver.

In this section, we will develop the small-scale fading component r0(t)r0(t) size 12{r rSub { size 8{0} } \( t \) } {}. Analysis proceeds on the assumption that the antenna remains within a limited trajectory so that the effect of large-scale fading m(t) is constant. Assume that the antenna is traveling and there are multiple scatter paths, each associated with a time-variant propagation delay τn(t)τn(t) size 12{τ rSub { size 8{n} } \( t \) } {} and a time variant multiplicative factor αn(t)αn(t) size 12{α rSub { size 8{n} } \( t \) } {}. Neglecting noise, the received bandpass signal can be written as below:

r(t)=nαn(t)s(tτn(t))r(t)=nαn(t)s(tτn(t)) size 12{r \( t \) = Sum cSub { size 8{n} } {α rSub { size 8{n} } } \( t \) s \( t - τ rSub { size 8{n} } \( t \) \) } {}(1)

Substituting Equation (1, module Characterizing Mobile-Radio Propagation) over into Equation (1), we can write the received bandpass signal as follow:

r(t)=Re((nαn(t)g(tτn(t))ej2πfc(tτn(t)))r(t)=Re((nαn(t)g(tτn(t))ej2πfc(tτn(t))) size 12{r \( t \) "=Re" \( \( Sum cSub {n} {α rSub { size 8{n} } \( t \) g \( t - τ rSub { size 8{n} } \( t \) \) e rSup { size 8{j2πf rSub { size 6{c} } \( t - τ rSub { size 6{n} } \( t \) \) } } } size 12{ \) }} {}{}(2)

= Re ( ( n α n ( t ) e j2πf c τ n ( t ) g ( t τ n ( t ) ) ) e j2πf c t = Re ( ( n α n ( t ) e j2πf c τ n ( t ) g ( t τ n ( t ) ) ) e j2πf c t size 12{ {}="Re" \( \( Sum cSub {n} {α rSub { size 8{n} } \( t \) e rSup { size 8{ - j2πf rSub { size 6{c} } τ rSub { size 6{n} } \( t \) } } } size 12{g \( t - τ rSub {n} } size 12{ \( t \) \) \) e rSup {j2πf rSub { size 6{c} } t} }} {}

We have the equivalent received bandpass signal is

s(t)=nαn(t)ej2πfτn(t)cg(tτn(t))s(t)=nαn(t)ej2πfτn(t)cg(tτn(t)) size 12{s \( t \) = Sum cSub {n} {α rSub { size 8{n} } \( t \) e rSup { size 8{ - j2πfτ rSub { size 6{n} } \( t \) rSub { size 6{c} } } } g \( t - τ rSub {n} size 12{ \( t \) \) }} } {}(3)

Consider the transmission of an unmodulated carrier at frequency fcfc size 12{f rSub { size 8{c} } } {} or in other words, for all time, g(t)=1. So the received bandpass signal become as follow:

s(t)=nαn(t)ej2πfcτn(t)=nαn(t)en(t)s(t)=nαn(t)ej2πfcτn(t)=nαn(t)en(t) size 12{s \( t \) = Sum cSub {n} {α rSub { size 8{n} } \( t \) e rSup { size 8{ - j2πf rSub { size 6{c} } τ rSub { size 6{n} } \( t \) } } = Sum cSub {n} {α rSub {n} size 12{ \( t \) e rSup { - jθ rSub { size 6{n} } \( t \) } }} } } {}(4)

The baseband signal s(t) consists of a sum of time-variant components having amplitudes αn(t)αn(t) size 12{α rSub { size 8{n} } \( t \) } {} and phases θn(t)θn(t) size 12{θ rSub { size 8{n} } \( t \) } {}. Notice that θn(t)θn(t) size 12{θ rSub { size 8{n} } \( t \) } {} will change by 2π radians whenever τn(t)τn(t) size 12{τ rSub { size 8{n} } \( t \) } {} changes by 1/ fcfc size 12{f rSub { size 8{c} } } {} (very small delay). These multipath components combine either constructively or destructively, resulting in amplitude variations of s(t). Final equation is very important because it tell us that a bandpass signal s(t) is the signal that experienced the fading effects and gave rise to the received signal r(t), these effects can be described by analyzing r(t) at the baseband level.

Figure 1
Figure 1 (moi1.png)

When the received signal is made up of multiple reflective arrays plus a significant line-of-sight (non-faded) component, the received envelope amplitude has a Rician pdf as below, and the fading is preferred to as Rician fading

p(r0)={r0σ2exp(r02+A2)2I0(r0Aσ2)r00,A00otherwisep(r0)={r0σ2exp(r02+A2)2I0(r0Aσ2)r00,A00otherwise size 12{p \( r rSub { size 8{0} } \) = left lbrace matrix { { {r rSub { size 8{0} } } over {σ rSup { size 8{2} } } } "exp" left [ - { { \( r rSub { size 8{0} } rSup { size 8{2} } +A rSup { size 8{2} } \) } over {2σ rSup { size 8{2} } } } right ]I rSub { size 8{0} } \( { {r rSub { size 8{0} } A} over {σ rSup { size 8{2} } } } \) {} # r rSub { size 8{0} } >= 0,A >= 0 {} ## 0 {} # ital "otherwise"{} } right none } {}(5)

The parameter σ2σ2 size 12{σ rSup { size 8{2} } } {} is the pre-detection mean power of the multipath signal. A denotes the peak magnitude of the non-faded signal component and I0()I0() size 12{I rSub { size 8{0} } \( - \) } {} is the modified Bessel function. The Rician distribution is often described in terms of a parameter K, which is defined as the ratio of the power in the specular component to the power in the multipath signal. It is given by K=A2/2K=A2/2 size 12{K=A rSup { size 8{2} } /2σ rSup { size 8{2} } } {}.

When the magnitude of the specular component A approach zero, the Rician pdf approachs a Rayleigh pdf, shown as

p(r0)={r0σ2expr022r000otherwisep(r0)={r0σ2expr022r000otherwise size 12{p \( r rSub { size 8{0} } \) = left lbrace matrix { { {r rSub { size 8{0} } } over {σ rSup { size 8{2} } } } "exp" left [ - { {r rSub { size 8{0} } rSup { size 8{2} } } over {2σ rSup { size 8{2} } } } right ] {} # r rSub { size 8{0} } >= 0 {} ## 0 {} # ital "otherwise"{} } right none } {}(6)

The Rayleigh pdf results from having no specular signal component, it represents the pdf associated with the worst case of fading per mean received signal power.

Small scale manifests itself in two mechanisms - time spreading of signal (or signal dispersion) and time-variant behavior of the channel (figure 2). It is important to distinguish between two different time references- delay time τ and transmission time t. Delay time refers to the time spreading effect resulting from the fading channel’s non-optimum impulse response. The transmission time, however, is related to the motion of antenna or spatial changes, accounting for propagation path changes that are perceived as the channel’s time-variant behavior.

Figure 2
Figure 2 (moi3.png)

Content actions

Give Feedback:

E-mail the module authors | Rate module ( How does the rating system work?)

Rating system

Ratings

Ratings allow you to judge the quality of modules. If other users have ranked the module then its average rating is displayed below. Ratings are calculated on a scale from one star (Poor) to five stars (Excellent).

How to rate a module

Hover over the star that corresponds to the rating you wish to assign. Click on the star to add your rating. Your rating should be based on the quality of the content. You must have an account and be logged in to rate content.

(0 ratings)

Download:

Add module to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections directly in Connexions. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need a Connexions account to use 'My Favorites'.

| A lens (?)

Definition of a lens

Lenses

A lens is a custom view of Connexions content. You can think of it as a fancy kind of list that will let you see Connexions through the eyes of organizations and people you trust.

What is in a lens?

Lens makers point to Connexions materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

Who can create a lens?

Any individual Connexions member, a community, or a respected organization.

What are tags? tag icon

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks