Angular SHM involves “to and fro” angular oscillation of a body about a central position or orientation. The particle or the body undergoes small angular displacement about mean position. This results, when the body under stable equilibrium is disturbed by a small external torque. In turn, the rotating system generates a restoring torque, which tries to restore equilibrium. Learning about angular SHM is easy as there runs a parallel set of governing equations for different physical quantities involved with the motion. Most of the time, we only need to know the equivalent terms to replace the linear counterpart in various equations. However, there are few finer differences that we need to be aware about. For example, how would be treat angular frequency “ω” and angular velocity of the oscillating body in SHM. They are different.

Restoring torque We write restoring torque equation for angular SHM as : τ = - k θ This “k” is springiness of the restoring torque. We associate “springiness” with any force or torque which follows the linear proportionality with negative displacement. For this reason, we call it “spring constant” for all system – not limited to block-spring system. In the case of simple pendulum, we associate this “springiness” to gravity. Similarly, this property can be associated with other forces like torsion, stress, pressure and many other force systems, which operate to restore equilibrium.

Torsion constant A common setup capable of executing angular SHM consists of a weight attached to a wire. The rigid body is suspended from one end of the wire, whereas its other end is fixed. When the rigid body is given a small angular displacement, the body oscillates about certain reference line – which corresponds to the equilibrium position.

Torsion pendulum The rigid body hanging from wire executes angular SHM about the position of equilibrium. The body oscillates angularly. If we assume conservation of mechanical energy, then system oscillates with constant angular amplitude indefinitely. The whole system is known as torsion pendulum. In this case “k” of the torque equation is also known as “torsion constant”. Dropping negative sign, k = τ θ Clearly, torsion constant measures the torque per radian of angular displacement. It depends on length, diameter and material of the wire.

Equations of angular SHM We write various equations for angular SHM without derivation – unless there is differentiating aspect involved. In general, we substitute : Linear inertia “m” by angular inertia “I” Force, “F” by torque “τ” Linear acceleration “a” by angular acceleration, “α” Linear displacement “x” by angular displacement “θ” Linear amplitude “A” by angular amplitude “ θ 0 ” Linear velocity “v” by angular velocity “ ⅆ θ ∕ ⅆ t ” Importantly, symbols of angular frequency (ω), spring constant (k), phase constant (φ), time period (T) and frequency (ν) remain same in the description of angular SHM. Angular displacement θ = θ 0 sin ω t + φ where “ θ 0 ” is the amplitude, “φ” is the phase constant and “ωt + φ” is the phase. Clearly, angular displacement is periodic with respect to time as it is represented by bounded trigonometric function. The displacement “θ” varies between “ − θ 0 ” and “ θ 0 ”. SHM Equation ⅆ 2 θ ⅆ t 2 + ω 2 θ = 0 Angular velocity Angular velocity differs to angular frequency (ω). In the case of linear SHM, we had compared linear SHM with uniform circular motion (UCM). It was found that projection of UCM on an axis is equivalent description of linear SHM. It emerged that angular frequency is same as the magnitude of constant angular velocity of the equivalent UCM. The angular velocity of the body under angular oscillation, however, is different. Importantly, angular velocity of SHM is not constant – whereas angular frequency is constant. The angular velocity in angular SHM is obtained either as the solution of equation of motion or by differentiating expression of angular displacement with respect to time. Clearly, we need to have a different symbol to represent angular velocity in angular SHM. Let us denote this by the differential expression itself “ ⅆ θ ∕ ⅆ t ”, which is not equal to “ω”. ⅆ θ ⅆ t = ω θ 0 2 - θ 2 = ω θ 0 cos ω t + φ Angular acceleration α = - ω 2 θ = - k I θ = - ω 2 θ 0 sin ω t + φ Torque τ = I α = - k θ = - I ω 2 θ = = - I ω 2 θ 0 sin ω t + φ Frequency, angular frequency, time period The angular frequency is given by : ω = k I = | angular acceleration angular displacement | Time period is obtained from the defining relation : T = 2 π ω = 2 π I k = 2 π | angular displacement angular acceleration | Frequency is obtained from the defining relation : ν = 1 T = ω 2 π = 1 2 π k I = 1 2 π | angular acceleration angular displacement | Kinetic energy In terms of angular displacement : K = 1 2 I d θ d t 2 = 1 2 I ω 2 θ 0 2 − θ 2 In terms of time : K = 1 2 I ω 2 θ 0 2 cos 2 ω t + φ Potential energy In terms of angular displacement : U = 1 2 k θ 2 = 1 2 I ω 2 θ 2 In terms of time : U = 1 2 I ω 2 θ 0 2 sin 2 ω t + φ Mechanical energy E = K + U E = 1 2 I ω 2 θ 0 2 − θ 2 + 1 2 I ω 2 θ 2 = 1 2 I ω 2 θ 0 2

Example Problem 1: A body executing angular SHM has angular amplitude of 0.4 radian and time period of 0.1 s. If angular displacement of the body is 0.2 radian from the center of oscillation at time t = 0, then write the equation of angular displacement. Solution : The equation of angular displacement is given by : θ = θ 0 sin ω t + φ Here, θ 0 = 0.4 radian Also, time period is given. Hence, we can determine angular frequency, ω, as : ⇒ ω = 2 π T = 2 π 0.1 = 20 π radian/s Putting these values, the expression of angular displacement is : ⇒ θ = 0.4 sin 20 π t + φ We, now, need to determine the phase constant for the given initial condition. At t = 0, θ = 0.2 radian. Hence, ⇒ 0.2 = 0.4 sin 20 π X 0 + φ = 0.4 sin φ ⇒ sin φ = 0.2 0.4 = 1 2 = sin π 6 ⇒ φ = π 6 Putting in the expression, the angular displacement is given by : ⇒ θ = 0.4 sin 20 π t + π 6

Moment of inertia and angular SHM Angular SHM provides a very effective technique for measuring moment of inertia. We can have a set up of torsion pendulum for a body, whose MI is to be determined. Measuring time period of oscillation, we have : T = 2 π I k Squaring both sides and arranging, ⇒ k T 2 = 4 π 2 I ⇒ I = k T 2 4 π 2 Generally, we do not use this equation in the present form as it involves unknown spring constant, “k”. Actually, we carry out experiment for measuring time period first with a regularly shaped object like a rod of known dimensions and mass. This allows us to determine spring constant as MI of the object is known. Then, we determine time period with the object whose MI is to be determined. Let subscripts “1” and “2” denote objects of known and unknown MIs respectively. Then, ⇒ I 1 I 2 = T 1 2 T 2 2 ⇒ I 2 = I 1 T 2 2 T 1 2

Example Problem 2: A uniform rod of mass 1 kg and length 0.24 m, hangs from the ceiling with the help of a metallic wire. The time period of SHM is measured to be 2 s. The rod is replaced by a body of unknown shape and mass and the time period for the set up is measured to be 4 s. Find the MI of the body. Solution : Let subscripts “1” and “2” denote objects of known and unknown MIs. The MI of the rod is calculated, using formula as : ⇒ I 1 = m L 2 12 = 1 X 0.24 2 12 = 0.0048 k g - m 2 The MI of the second body is given by : ⇒ I 2 = 0.0048 X 4 2 2 2 = 0.0048 X 4 = 0.0192 k g - m 2