Skip to content Skip to navigation Skip to collection information

Connexions

You are here: Home » Content » Collaborative Statistics: Custom Version modified by R. Bloom » The Uniform Distribution (modified R. Bloom)

Navigation

Table of Contents

Recently Viewed

This feature requires Javascript to be enabled.
 

The Uniform Distribution (modified R. Bloom)

Module by: Roberta Bloom. E-mail the author

Based on: Continuous Random Variables: The Uniform Distribution by Susan Dean, Barbara Illowsky, Ph.D.

Summary: This module examines the properties of the continuous Uniform probability distribution, which describes a set of continuous data for which all intervals of values having the same length are equally likely. This revision is based on the original module m16819 in the textbook collection Collaborative Statistics by S. Dean and Dr. B. Illowsky; the last example in the original module was replaced with a new example.

Example 1

Illustrate the uniform distribution. The data that follows are a random sample of 55 smiling times, in seconds, of an eight-week old baby.

Table 1
10.4 19.6 18.8 13.9 17.8 16.8 21.6 17.9 12.5 11.1 4.9
12.8 14.8 22.8 20.0 15.9 16.3 13.4 17.1 14.5 19.0 22.8
1.3 0.7 8.9 11.9 10.9 7.3 5.9 3.7 17.9 19.2 9.8
5.8 6.9 2.6 5.8 21.7 11.8 3.4 2.1 4.5 6.3 10.7
8.9 9.4 9.4 7.6 10.0 3.3 6.7 7.8 11.6 13.8 18.6

sample mean = 11.49 and sample standard deviation = 6.23

We will assume that the sample of smiling times is drawn from a population that follows a uniform distribution between 0 and 23 seconds. This means that any smiling time between 0 and 23 seconds is equally likely.

Let XX = length of time, in seconds, of an eight-week old's smile.

The notation for the uniform distribution is

XX ~ U(a, b)U(a,b) where aa = the lowest value and bb = the highest value.

For this example, XX ~ U(0, 23)U(0,23). 0<X<23 0 X 23.

Formulas for the theoretical mean and standard deviation are

μ=a+b 2 μ a+b 2 and σ= (b-a)2 12 σ (b-a)2 12

For this problem, the theoretical mean and standard deviation are

μ=0+23 2=11.50 μ 0+23 2 11.50 seconds and σ= (23-0)2 12 =6.64 σ (23-0)2 12 6.64 seconds

Notice that the theoretical mean and standard deviation are close to the sample mean and standard deviation.

To find f⁢XfX: f⁢X = 1 23-0 =123 fX 1 23-0 123

Example 2

Problem 1

What is the probability that a randomly chosen eight-week old smiles between 2 and 18 seconds?

Solution

Find P(2<X<18) P(2 X 18).

P(2<X<18)=(base)(height)=(18-2)⋅123=1623 P(2 X 18) (base)(height) (18-2)⋅123 1623.

f(X) graph displaying a boxed region consisting of a horizontal line extending to the right from midway on the y-axis, a vertical upward line from point 23 on the x-axis, and the x and y-axes. A shaded region from points 2-18 occurs within this area.

Problem 2

Find the 90th percentile for an eight week old's smiling time.

Solution

Ninety percent of the smiling times fall below the 90th percentile, kk, so P(X<k)=0.90 P(X k) 0.90

P(X<k)=0.90 P(X k) 0.90

(base)(height)=0.90(base)(height)=0.90

(k-0)⋅123=0.90(k-0)⋅123=0.90

k=23⋅0.90=20.7 k 23⋅0.90 20.7

f(X)=1/23 graph displaying a boxed region consisting of a horizontal line extending to the right from point 1/23 on the y-axis, a vertical upward line from point 23 on the x-axis, and the x and y-axes. A shaded region from points 0-k occurs within this area. The shaded region probability area is equal to 0.90.

Problem 3: Problem 3 is OPTIONAL: Conditional Probability

Find the probability that a random eight week old smiles more than 12 seconds KNOWING that the baby smiles MORE THAN 8 SECONDS.

Solution

Find P(X>12|X>8) P(X 12|X 8) There are two ways to do the problem. For the first way, use the fact that this is a conditional and changes the sample space. The graph illustrates the new sample space. You already know the baby smiled more than 8 seconds.

Write a new f⁢XfX: f⁢X = 1 23-8 =115 fX 1 23-8 115

for 8<X<23 8 X 23

P(X>12|X>8)=(23-12)⋅115=1115 P(X 12|X 8) (23-12)⋅115 1115

f(X)=1/15 graph displaying a boxed region consisting of a horizontal line extending to the right from point 1/15 on the y-axis, a vertical upward line from points 8 and 23 on the x-axis, and the x-axis. A shaded region from points 12-23 occurs within this area.

For the second way, use the conditional formula from Chapter 3 with the original distribution XX ~ U(0,23)U(0,23):

P ( A | B ) = P ( A AND B ) P ( B ) P(A|B)= P ( A AND B ) P ( B ) For this problem, AA is ( X > 12 ) ( X 12 ) and B B is ( X > 8 ) ( X 8 ) .

So, P(X>12|X>8)= (X>12 AND X >8) P ( X > 8 ) = P ( X > 12 ) P ( X > 8 ) = 11 23 15 23 = 0.733 P(X 12|X 8) (X>12 AND X >8) P ( X 8 ) P ( X 12 ) P ( X 8 ) 11 23 15 23 0.733

f(X)=1/23 graph displaying a conditional boxed region consisting of a horizontal red line extending to the right from point 1/23 on the y-axis, a vertical red upward line from point 23 on the x-axis, and the x and y-axes. Two vertical upward lines from points 8 and 12 on the x-axis occur within this area.

Example 3

Uniform: The amount of time, in minutes, that a person must wait for a bus is uniformly distributed between 0 and 15 minutes.

Problem 1

What is the probability that a person waits fewer than 12.5 minutes?

Solution

Let XX = the number of minutes a person must wait for a bus. aa = 0 and bb = 15. X~U(0,15)X~U(0,15). Write the probability density function. f⁢X = 115-0 =115 fX=115-0=115 for 0<X<15 0 X 15

Find P(X<12.5) P(X 12.5). Draw a graph.

P(X<k)=(base)(height) =(12.5-0) ⋅115 =0.8333 P(X k) (base)(height)=(12.5-0)⋅115=0.8333

The probability a person waits less than 12.5 minutes is 0.8333.

f(X)=1/15 graph displaying a boxed region consisting of a horizontal line extending to the right from point 1/15 on the y-axis, a vertical upward line from point 15 on the x-axis, and the x and y-axes. A shaded region from points 0-12.5 occurs within this area.

Problem 2

On the average, how long must a person wait?

Find the mean, μμ, and the standard deviation, σσ.

Solution

μ= a+b 2 = 15+0 2 = 7.5μ= a+b 2= 15+0 2=7.5. On the average, a person must wait 7.5 minutes.

σ= (b-a)2 12 = (15-0)2 12 = 4.3σ= (b-a)2 12= (15-0)2 12=4.3. The Standard deviation is 4.3 minutes.

Problem 3

Ninety percent of the time, the time a person must wait falls below what value?

Note:

This asks for the 90th percentile.

Solution

Find the 90th percentile. Draw a graph. Let kk = the 90th percentile.

P(X<k)=(base)(height) =(k-0) ⋅(115) P(X k) (base)(height)=(k-0)⋅(115)

0.90= k⋅115 0.90=k⋅115

k = (0.90)(15) = 13.5k = (0.90)(15) = 13.5

kk is sometimes called a critical value.

The 90th percentile is 13.5 minutes. Ninety percent of the time, a person must wait at most 13.5 minutes.

f(X)=1/15 graph displaying a boxed region consisting of a horizontal line extending to the right from point 1/15 on the y-axis, a vertical upward line from an arbitrary point on the x-axis, and the x and y-axes. A shaded region from points 0-k occurs within this area. The area of this probability region is equal to 0.90.

Example 4

Uniform: Ace Heating and Air Conditioning Service finds that the amount of time a repairman needs to fix a furnace is uniformly distributed between 1.5 and 4 hours. Let XX = the time needed to fix a furnace. Then XX ~ U(1.5, 4)U(1.5,4).

  1. Find the problem that a randomly selected furnace repair requires more than 2 hours.
  2. Find the probability that a randomly selected furnace repair requires less than 3 hours.
  3. Find the 30th percentile of furnace repair times.
  4. The longest 25% of repair furnace repairs take at least how long? (In other words: Find the minimum time for the longest 25% of repair times.) What percentile does this represent?
  5. Find the mean and standard deviation

Problem 1

Find the probability that a randomly selected furnace repair requires longer than 2 hours.

Solution

To find f⁢XfX: f⁢X = 1 4-1.5 =12.5 fX 1 4-1.5 12.5 so f⁢XfX 0.4 0.4

P(X>2) = (base)(height) = (4 − 2)(0.4) = 0.8

Figure 1: Uniform Distribution between 1.5 and 4 with shaded area between 2 and 4 representing the probability that the repair time X is greater than 2
Example 4 Figure 1
Example 4 Figure 1 (UniformEx4Graph1.JPG)

Problem 2

Find the probability that a randomly selected furnace repair requires less than 3 hours. Describe how the graph differs from the graph in the first part of this example.

Solution

P(X<3) P(X 3) = (base)(height) = (3 − 1.5)(0.4) = 0.6

The graph of the rectangle showing the entire distribution would remain the same. However the graph should be shaded between X=1.5 and X=3. Note that the shaded area starts at X=1.5 rather than at X=0; since X~U(1.5,4), X can not be less than 1.5.

Figure 2: Uniform Distribution between 1.5 and 4 with shaded area between 1.5 and 3 representing the probability that the repair time X is less than 3
Example 4 Figure 2
Example 4 Figure 2 (UniformEx4Graph2.JPG)

Problem 3

Find the 30th percentile of furnace repair times.

Solution

Figure 3: Uniform Distribution between 1.5 and 4 with an area of 0.30 shaded to the left, representing the shortest 30% of repair times.
Example 4 Figure 3
Example 4 Figure 3 (UniformEx4Graph3.JPG)

P(X<k)=0.30 P(X k) 0.30

P(X<k)=(base)(height) =(k-1.5) ⋅(0.4) P(X k) (base)(height)=(k-1.5)⋅(0.4)

  • 0.3 = (k − 1.5) (0.4) ; Solve to find k:
  • 0.75 = k − 1.5 , obtained by dividing both sides by 0.4
  • k = 2.25 , obtained by adding 1.5 to both sides

The 30th percentile of repair times is 2.25 hours. 30% of repair times are 2.5 hours or less.

Problem 4

The longest 25% of furnace repair times take at least how long? (Find the minimum time for the longest 25% of repairs.)

Solution

Figure 4: Uniform Distribution between 1.5 and 4 with an area of 0.25 shaded to the right representing the longest 25% of repair times.
Example 4 Figure 4
Example 4 Figure 4 (UniformEx4Graph4.JPG)

P(X>k)=0.25 P(X k) 0.25

P(X>k)=(base)(height) =(4-k) ⋅(0.4) P(X k) (base)(height)=(4-k)⋅(0.4)

  • 0.25 = (4 − k)(0.4) ; Solve for k:
  • 0.625 = 4 − k , obtained by dividing both sides by 0.4
  • −3.375 = −k , obtained by subtracting 4 from both sides
  • k=3.375

The longest 25% of furnace repairs take at least 3.375 hours (3.375 hours or longer).

Note: Since 25% of repair times are 3.375 hours or longer, that means that 75% of repair times are 3.375 hours or less. 3.375 hours is the 75th percentile of furnace repair times.

Problem 5

Find the mean and standard deviation

Solution

μ=a+b 2 μ a+b 2 and σ= (b-a)2 12 σ (b-a)2 12

μ=1.5+4 2=2.75 μ 1.5+4 2 2.75 hours and σ= (4-1.5)2 12 =0.7217 σ (4-1.5)2 12 0.7217 hours

Glossary

Conditional Probability:
The likelihood that an event will occur given that another event has already occurred.
Uniform Distribution:
Continuous random variable (RV) that appears to have equally likely outcomes over the domain, a<x<ba<x<b size 12{a<x<b} {}. Often referred as Rectangular distribution because graph of its pdf has form of rectangle. Notation: X~U(a,b)X~U(a,b) size 12{X "~" U \( a,b \) } {}. The mean is μ=a+b2μ=a+b2 size 12{μ= { {a+b} over {2} } } {}, and the variance is σ2=(b−a)212σ2=(b−a)212 size 12{s rSup { size 8{2} } = { { \( b-a \) rSup { size 8{2} } } over {"12"} } } {}, the probability density function is f(x)=1b−a,a≤X≤bf(x)=1b−a,a≤X≤b size 12{f \( x \) = { {1} over {b-a} } ," "a <= X <= b} {}, and cumulative distribution is P(X≤x)=x−ab−aP(X≤x)=x−ab−a size 12{P \( X <= x \) = { {x-a} over {b-a} } } {}.

Collection Navigation

Content actions

Download module as:

PDF | More downloads ...

Add:

Collection to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

Definition of a lens

Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

Who can create a lens?

Any individual member, a community, or a respected organization.

What are tags? tag icon

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks

Module to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

Definition of a lens

Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

Who can create a lens?

Any individual member, a community, or a respected organization.

What are tags? tag icon

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks