Skip to content Skip to navigation Skip to collection information

Connexions

You are here: Home » Content » Siyavula textbooks: Grade 11 Physical Science » Converging lenses

Navigation

Table of Contents

Lenses

What is a lens?

Definition of a lens

Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

Who can create a lens?

Any individual member, a community, or a respected organization.

What are tags? tag icon

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

This content is ...

Affiliated with (What does "Affiliated with" mean?)

This content is either by members of the organizations listed or about topics related to the organizations listed. Click each link to see a list of all content affiliated with the organization.
  • Bookshare

    This collection is included inLens: Bookshare's Lens
    By: Bookshare - A Benetech Initiative

    Comments:

    "Accessible versions of this collection are available at Bookshare. DAISY and BRF provided."

    Click the "Bookshare" link to see all content affiliated with them.

  • FETPhysics display tagshide tags

    This module is included inLens: Siyavula: Physics (Gr. 10-12)
    By: Siyavula

    Review Status: In Review

    Click the "FETPhysics" link to see all content affiliated with them.

    Click the tag icon tag icon to display tags associated with this content.

  • Siyavula: Physical Science display tagshide tags

    This collection is included inLens: Siyavula textbooks: Physical Science
    By: Free High School Science Texts Project

    Click the "Siyavula: Physical Science" link to see all content affiliated with them.

    Click the tag icon tag icon to display tags associated with this content.

Also in these lenses

  • Siyavula : FET Physics

    This collection is included inLens: Siyavula : FET Physics
    By: Nerk van Rossum

    Click the "Siyavula : FET Physics" link to see all content selected in this lens.

Recently Viewed

This feature requires Javascript to be enabled.

Tags

(What is a tag?)

These tags come from the endorsement, affiliation, and other lenses that include this content.
 

Introduction

In Grade 10, we studied how light is reflected and refracted. This chapter builds on what you have learnt in Grade 10. You will learn about lenses, how the human eye works as well as how telescopes and microscopes work.

Lenses

In this section we will discuss properties of thin lenses. In Grade 10, you learnt about two kinds of mirrors: concave mirrors which were also known as converging mirrors and convex mirrors which were also known as diverging mirrors. Similarly, there are two types of lenses: converging and diverging lenses.

We have learnt how light travels in different materials, and we are now ready to learn how we can control the direction of light rays. We use lenses to control the direction of light. When light enters a lens, the light rays bend or change direction as shown in Figure 1.

Figure 1: The behaviour of parallel light rays entering either a converging or diverging lens.
(a)
Figure 1(a) (PG11C3_001.png)
(b)
Figure 1(b) (PG11C3_002.png)
Definition 1: Lens

A lens is any transparent material (e.g. glass) of an appropriate shape that can take parallel rays of incident light and either converge the rays to a point or diverge the rays from a point.

Some lenses will focus light rays to a single point. These lenses are called converging or convex lenses. Other lenses spread out the light rays so that it looks like they all come from the same point. These lenses are called diverging or concave lenses. Lenses change the direction of light rays by refraction. They are designed so that the image appears in a certain place or as a certain size. Lenses are used in eyeglasses, cameras, microscopes, and telescopes. You also have lenses in your eyes!

Definition 2: Converging Lenses

Converging lenses converge parallel rays of light and are thicker in the middle than at the edges.

Definition 3: Diverging Lenses

Diverging lenses diverge parallel rays of light and are thicker at the edges than in the middle.

Examples of converging and diverging lenses are shown in Figure 2.

Figure 2: Types of lenses
Figure 2 (PG11C3_003.png)

Before we study lenses in detail, there are a few important terms that must be defined. Figure 3 shows important lens properties:

  • The principal axis is the line which runs horizontally straight through the optical centre of the lens. It is also sometimes called the optic axis.
  • The optical centre (O) of a convex lens is usually the centre point of the lens. The direction of all light rays which pass through the optical centre, remains unchanged.
  • The focus or focal point of the lens is the position on the principal axis where all light rays which run parallel to the principal axis through the lens converge (come together) at a point. Since light can pass through the lens either from right to left or left to right, there is a focal point on each side of the lens (F1F1 and F2F2), at the same distance from the optical centre in each direction. (Note: the plural form of the word focus is foci.)
  • The focal length (ff) is the distance between the optical centre and the focal point.
Figure 3: Properties of lenses.
(a)
Figure 3(a) (PG11C3_004.png)
(b)
Figure 3(b) (PG11C3_005.png)

Converging Lenses

We will only discuss double convex converging lenses as shown in Figure 4. Converging lenses are thinner on the outside and thicker on the inside.

Figure 4: A double convex lens is a converging lens.
Figure 4 (PG11C3_006.png)

Figure 5 shows a convex lens. Light rays traveling through a convex lens are bent towards the principal axis. For this reason, convex lenses are called converging lenses.

Figure 5: Light rays bend towards each other or converge when they travel through a convex lens. F1F1 and F2F2 are the foci of the lens.
Figure 5 (PG11C3_007.png)

When an object is placed in front of a lens, the light rays coming from the object are refracted by the lens. An image of the object is produced at the point where the light rays intersect. The type of images created by a convex lens is dependent on the position of the object. We will examine the following cases:

  1. the object is placed at a distance greater than 2f2f from the lens
  2. the object is placed at a distance equal to 2f2f from the lens
  3. the object is placed at a distance between 2f2f and ff from the lens
  4. the object is placed at a distance less than ff from the lens

We examine the properties of the image in each of these cases by drawing ray diagrams. We can find the image by tracing the path of three light rays through the lens. Any two of these rays will show us the location of the image. The third ray is used to check that the location is correct.

Experiment : Lenses A

Aim:

To determine the focal length of a convex lens.

Method:

  1. Using a distant object from outside, adjust the position of the convex lens so that it gives the smallest possible focus on a sheet of paper that is held parallel to the lens.
  2. Measure the distance between the lens and the sheet of paper as accurately as possible.

Results:

The focal length of the lens is                       cm

Experiment : Lenses B

Aim:

To investigate the position, size and nature of the image formed by a convex lens.

Method:

  1. Set up a candle, and the lens from Experiment Lenses A in its holder and the screen in a straight line on the metre rule. Make sure the lens holder is on the 50 cm mark. From your knowledge of the focal length of your lens, note where ff and 2f2f are on both sides of the lens.
  2. Using the position indicated on the table below, start with the candle at a position that is greater than 2f2f and adjust the position of the screen until a sharp focused image is obtained. Note that there are two positions for which a sharp focused image will not be obtained on the screen. When this is so, remove the screen and look at the candle through the lens.
  3. Fill in the relevant information on the table below
Figure 6: Experimental setup for investigation.
Figure 6 (PG11C3_008.png)

Results:

Table 1
Relative position of object Relative position of image Image upright or inverted Relative size of image Nature of image
Beyond 2f2f        cm        
At 2f2f        
        cm        
Between 2f2f and ff        
        cm        
At ff        
        cm        
Between ff and the lens        
        cm        

QUESTIONS:

  1. When a convex lens is being used:
    1. A real inverted image is formed when an object is placed                      
    2. No image is formed when an object is placed                      
    3. An upright, enlarged, virtual image is formed when an object is placed                      
  2. Write a conclusion for this investigation.

Experiment : Lenses C

Aim:

To determine the mathematical relationship between d0,did0,di and ff for a lens.

Method:

  1. Using the same arrangement as in Experiment Lenses B, place the object (candle) at the distance indicated from the lens.
  2. Move the screen until a clear sharp image is obtained. Record the results on the table below.

Results:

ff = focal length of lens d0d0 = object distance didi = image distance

Table 2
Object distance Image distance 1 d 0 1 d 0 1 d i 1 d i 1 d 0 + 1 d i 1 d 0 + 1 d i
d0d0 (cm) didi (cm) (cm-1-1) (cm-1-1) (cm-1-1)
25,0        
20,0        
18,0        
15,0        
        Average =        
Reciprocal of average = 1 1 d 0 + 1 d i = ̲ ( a ) Focal length of lens = ̲ ( b ) Reciprocal of average = 1 1 d 0 + 1 d i = ̲ ( a ) Focal length of lens = ̲ ( b )
(1)

QUESTIONS:

  1. Compare the values for (a) and (b) above and explain any similarities or differences
  2. What is the name of the mathematical relationship between d0d0, didi and ff?
  3. Write a conclusion for this part of the investigation.

Drawing Ray Diagrams for Converging Lenses

Ray diagrams are normally drawn using three rays. The three rays are labelled R1R1, R2R2 and R3R3. The ray diagrams that follow will use this naming convention.

  1. The first ray (R1R1) travels from the object to the lens parallel to the principal axis. This ray is bent by the lens and travels through the focal point.
  2. Any ray travelling parallel to the principal axis is bent through the focal point.
  3. If a light ray passes through a focal point before it enters the lens, then it will leave the lens parallel to the principal axis. The second ray (R2R2) is therefore drawn to pass through the focal point before it enters the lens.
  4. A ray that travels through the centre of the lens does not change direction. The third ray (R3R3) is drawn through the centre of the lens.
  5. The point where all three of the rays (R1R1, R2R2 and R3R3) intersect is the image of the point where they all started. The image will form at this point.

Tip: In ray diagrams, lenses are drawn like this::

Convex lens:

Figure 7
Figure 7 (PG11C3_009.png)

Concave lens:

Figure 8
Figure 8 (PG11C3_010.png)

CASE 1: Object placed at a distance greater than 2f2f from the lens

Figure 9: An object is placed at a distance greater than 2f2f away from the converging lens. Three rays are drawn to locate the image, which is real, and smaller than the object and inverted.
Figure 9 (PG11C3_011.png)

We can locate the position of the image by drawing our three rays. R1R1 travels from the object to the lens parallel to the principal axis, is bent by the lens and then travels through the focal point. R2R2 passes through the focal point before it enters the lens and therefore must leave the lens parallel to the principal axis. R3R3 travels through the center of the lens and does not change direction. The point where R1R1, R2R2 and R3R3 intersect is the image of the point where they all started.

The image of an object placed at a distance greater than 2f2f from the lens is upside down or inverted. This is because the rays which began at the top of the object, above the principal axis, after passing through the lens end up below the principal axis. The image is called a real image because it is on the opposite side of the lens to the object and you can trace all the light rays directly from the image back to the object.

The image is also smaller than the object and is located closer to the lens than the object.

Tip:
In reality, light rays come from all points along the length of the object. In ray diagrams we only draw three rays (all starting at the top of the object) to keep the diagram clear and simple.

CASE 2: Object placed at a distance equal to 2f2f from the lens

Figure 10: An object is placed at a distance equal to 2f2f away from the converging lens. Three rays are drawn to locate the image, which is real, the same size as the object and inverted.
Figure 10 (PG11C3_012.png)

We can locate the position of the image by drawing our three rays. R1R1 travels from the object to the lens parallel to the principal axis and is bent by the lens and then travels through the focal point. R2R2 passes through the focal point before it enters the lens and therefore must leave the lens parallel to the principal axis. R3R3 travels through the center of the lens and does not change direction. The point where R1R1, R2R2 and R3R3 intersect is the image of the point where they all started.

The image of an object placed at a distance equal to 2f2f from the lens is upside down or inverted. This is because the rays which began at the top of the object, above the principal axis, after passing through the lens end up below the principal axis. The image is called a real image because it is on the opposite side of the lens to the object and you can trace all the light rays directly from the image back to the object.

The image is the same size as the object and is located at a distance 2f2f away from the lens.

CASE 3: Object placed at a distance between 2f2f and ff from the lens

Figure 11: An object is placed at a distance between 2f2f and ff away from the converging lens. Three rays are drawn to locate the image, which is real, larger than the object and inverted.
Figure 11 (PG11C3_013.png)

We can locate the position of the image by drawing our three rays. R1R1 travels from the object to the lens parallel to the principal axis and is bent by the lens and then travels through the focal point. R2R2 passes through the focal point before it enters the lens and therefore must leave the lens parallel to the principal axis. R3R3 travels through the center of the lens and does not change direction. The point where R1R1, R2R2 and R3R3 intersect is the image of the point where they all started.

The image of an object placed at a distance between 2f2f and ff from the lens is upside down or inverted. This is because the rays which began at the top of the object, above the principal axis, after passing through the lens end up below the principal axis. The image is called a real image because it is on the opposite side of the lens to the object and you can trace all the light rays directly from the image back to the object.

The image is larger than the object and is located at a distance greater than 2f2f away from the lens.

CASE 4: Object placed at a distance less than ff from the lens

Figure 12: An object is placed at a distance less than ff away from the converging lens. Three rays are drawn to locate the image, which is virtual, larger than the object and upright.
Figure 12 (PG11C3_014.png)

We can locate the position of the image by drawing our three rays. R1R1 travels from the object to the lens parallel to the principal axis and is bent by the lens and then travels through the focal point. R2R2 passes through the focal point before it enters the lens and therefore must leave the lens parallel to the principal axis. R3R3 travels through the center of the lens and does not change direction. The point where R1R1, R2R2 and R3R3 intersect is the image of the point where they all started.

The image of an object placed at a distance less than ff from the lens is upright. The image is called a virtual image because it is on the same side of the lens as the object and you cannot trace all the light rays directly from the image back to the object.

The image is larger than the object and is located further away from the lens than the object.

The thin lens equation and magnification

The Thin Lens Equation

We can find the position of the image of a lens mathematically as there is a mathematical relation between the object distance, image distance, and focal length. The equation is:

1 f = 1 d o + 1 d i 1 f = 1 d o + 1 d i
(2)

where ff is the focal length, dodo is the object distance and didi is the image distance.

The object distance dodo is the distance from the object to the lens. dodo is positive if the object is on the same side of the lens as the light rays enter the lens. This should make sense: we expect the light rays to travel from the object to the lens. The image distance didi is the distance from the lens to the image. Unlike mirrors, which reflect light back, lenses refract light through them. We expect to find the image on the same side of the lens as the light leaves the lens. If this is the case, then didi is positive and the image is real (see Figure 11). Sometimes the image will be on the same side of the lens as the light rays enter the lens. Then didi is negative and the image is virtual (Figure 12). If we know any two of the three quantities above, then we can use the Thin Lens Equation to solve for the third quantity.

Magnification

It is possible to calculate the magnification of an image. The magnification is how much bigger or smaller the image is than the object.

m = - d i d o m = - d i d o
(3)

where mm is the magnification, dodo is the object distance and didi is the image distance.

If didi and dodo are both positive, the magnification is negative. This means the image is inverted, or upside down. If didi is negative and dodo is positive, then the image is not inverted, or right side up. If the absolute value of the magnification is greater than one, the image is larger than the object. For example, a magnification of -2 means the image is inverted and twice as big as the object.

Exercise 1: Using the lens equation

An object is placed 6 cm from a converging lens with a focal point of 4 cm.

  1. Calculate the position of the image
  2. Calculate the magnification of the lens
  3. Identify three properties of the image
Solution
  1. Step 1. Identify what is given and what is being asked :
    f = 4 cm d o = 6 cm d i = ? m = ? f = 4 cm d o = 6 cm d i = ? m = ?
    (4)

    Properties of the image are required.

  2. Step 2. Calculate the image distance (didi) :
    1 f = 1 d o + 1 d i 1 4 = 1 6 + 1 d i 1 4 - 1 6 = 1 d i 3 - 2 12 = 1 d i d i = 12 cm 1 f = 1 d o + 1 d i 1 4 = 1 6 + 1 d i 1 4 - 1 6 = 1 d i 3 - 2 12 = 1 d i d i = 12 cm
    (5)
  3. Step 3. Calculate the magnification :
    m = - d i d o = - 12 6 = - 2 m = - d i d o = - 12 6 = - 2
    (6)
  4. Step 4. Write down the properties of the image :

    The image is real, didi is positive, inverted (because the magnification is negative) and enlarged (magnification is >> 1)

Exercise 2: Locating the image position of a convex lens: I

An object is placed 5 cm to the left of a converging lens which has a focal length of 2,5 cm.

  1. What is the position of the image?
  2. Is the image real or virtual?
Solution
  1. Step 1. Set up the ray diagram :

    Draw the lens, the object and mark the focal points.

    Figure 13
    Figure 13 (PG11C3_015.png)

  2. Step 2. Draw the three rays :
    • R1R1 goes from the top of the object parallel to the principal axis, through the lens and through the focal point F2F2 on the other side of the lens.
    • R2R2 goes from the top of the object through the focal point F1F1, through the lens and out parallel to the principal axis.
    • R3R3 goes from the top of the object through the optical centre with its direction unchanged.

    Figure 14
    Figure 14 (PG11C3_016.png)

  3. Step 3. Find the image :

    The image is at the place where all the rays intersect. Draw the image.

    Figure 15
    Figure 15 (PG11C3_017.png)

  4. Step 4. Measure the distance between the lens and the image :

    The image is 5 cm away from the lens, on the opposite side of the lens to the object.

  5. Step 5. Is the image virtual or real? :

    Since the image is on the opposite side of the lens to the object, the image is real.

Exercise 3: Locating the image position of a convex lens: II

An object, 1 cm high, is placed 2 cm to the left of a converging lens which has a focal length of 3,0 cm. The image is found also on the left side of the lens.

  1. Is the image real or virtual?
  2. What is the position and height of the image?
Solution
  1. Step 1. Draw the picture to set up the problem :

    Draw the lens, principal axis, focal points and the object.

    Figure 16
    Figure 16 (PG11C3_018.png)

  2. Step 2. Draw the three rays to locate image :
    • R1R1 goes from the top of the object parallel to the principal axis, through the lens and through the focal point F2F2 on the other side of the lens.
    • R2R2 is the light ray which should go through the focal point F1F1 but the object is placed after the focal point! This is not a problem, just trace the line from the focal point F1F1, through the top of the object, to the lens. This ray then leaves the lens parallel to the principal axis.
    • R3R3 goes from the top of the object through the optical centre with its direction unchanged.
    • Do not write R1R1, R2R2 and R3R3 on your diagram, otherwise it becomes too cluttered.
    • Since the rays do not intersect on the right side of the lens, we need to trace them backwards to find the place where they do come together (these are the light gray lines). Again, this is the position of the image.

    Figure 17
    Figure 17 (PG11C3_019.png)

  3. Step 3. Draw the image :

    Figure 18
    Figure 18 (PG11C3_020.png)

  4. Step 4. Measure distance to image :

    The image is 6 cm away from the lens, on the same side as the object.

  5. Step 5. Measure the height of the image :

    The image is 3 cm high.

  6. Step 6. Is image real or virtual? :

    Since the image is on the same side of the lens as the object, the image is virtual.

Figure 19
Phet simulation for Geometrical Optics

Converging Lenses
  1. Which type of lens can be used as a magnifying glass? Draw a diagram to show how it works. An image of the sun is formed at the principal focus of a magnifying glass.
  2. In each case state whether a real or virtual image is formed:
    1. Much further than 2f2f
    2. Just further than 2f2f
    3. At 2f2f
    4. Between 2f2f and ff
    5. At ff
    6. Between ff and 0
    Is a virtual image always inverted?
  3. An object stands 50 mm from a lens (focal length 40 mm). Draw an accurate sketch to determine the position of the image. Is it enlarged or shrunk; upright or inverted?
  4. Draw a scale diagram (scale: 1 cm = 50 mm) to find the position of the image formed by a convex lens with a focal length of 200 mm. The distance of the object is 100 mm and the size of the object is 50 mm. Determine whether the image is enlarged or shrunk. What is the height of the image? What is the magnification?
  5. An object, 20 mm high, is 80 mm from a convex lens with focal length 50 mm. Draw an accurate scale diagram and find the position and size of the image, and hence the ratio between the image size and object size.
  6. An object, 50 mm high, is placed 100 mm from a convex lens with a focal length of 150 mm. Construct an accurate ray diagram to determine the nature of the image, the size of the image and the magnification. Check your answer for the magnification by using a calculation.
  7. What would happen if you placed the object right at the focus of a converging lens? Hint: Draw the picture.

Collection Navigation

Content actions

Download:

Collection as:

EPUB (?)

What is an EPUB file?

EPUB is an electronic book format that can be read on a variety of mobile devices.

Downloading to a reading device

For detailed instructions on how to download this content's EPUB to your specific device, click the "(?)" link.

| More downloads ...

Module as:

PDF | EPUB (?)

What is an EPUB file?

EPUB is an electronic book format that can be read on a variety of mobile devices.

Downloading to a reading device

For detailed instructions on how to download this content's EPUB to your specific device, click the "(?)" link.

| More downloads ...

Add:

Collection to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

Definition of a lens

Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

Who can create a lens?

Any individual member, a community, or a respected organization.

What are tags? tag icon

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks

Module to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

Definition of a lens

Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

Who can create a lens?

Any individual member, a community, or a respected organization.

What are tags? tag icon

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks