# Connexions

You are here: Home » Content » College Physics » Elasticity: Stress and Strain
Content endorsed by: OpenStax College

• Preface

• #### 34. Frontiers of Physics

• 35. Atomic Masses
• 37. Useful Information
• 38. Glossary of Key Symbols and Notation

### Lenses

What is a lens?

#### Definition of a lens

##### Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

##### What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

##### Who can create a lens?

Any individual member, a community, or a respected organization.

##### What are tags?

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

#### Endorsed by (What does "Endorsed by" mean?)

This content has been endorsed by the organizations listed. Click each link for a list of all content endorsed by the organization.
• OpenStax College

This collection is included in aLens by: OpenStax College

Click the "OpenStax College" link to see all content they endorse.

#### Affiliated with (What does "Affiliated with" mean?)

This content is either by members of the organizations listed or about topics related to the organizations listed. Click each link to see a list of all content affiliated with the organization.
• Pierpont C & TC

This module is included inLens: Pierpont Community & Technical College's Lens
By: Pierpont Community & Technical CollegeAs a part of collection: "College Physics -- HLCA 1104"

Click the "Pierpont C & TC" link to see all content affiliated with them.

Click the tag icon to display tags associated with this content.

• Featured Content

This collection is included inLens: Connexions Featured Content
By: Connexions

"This introductory, algebra-based, two-semester college physics book is grounded with real-world examples, illustrations, and explanations to help students grasp key, fundamental physics concepts. […]"

Click the "Featured Content" link to see all content affiliated with them.

Click the tag icon to display tags associated with this content.

### Recently Viewed

This feature requires Javascript to be enabled.

### Tags

(What is a tag?)

These tags come from the endorsement, affiliation, and other lenses that include this content.

Order printed collection

Inside Collection (Textbook):

Textbook by: OpenStax College. E-mail the author

# Elasticity: Stress and Strain

Module by: OpenStax College. E-mail the author

Summary:

• State Hooke’s law.
• Explain Hooke’s law using graphical representation between deformation and applied force.
• Discuss the three types of deformations such as changes in length, sideways shear and changes in volume.
• Describe with examples the young’s modulus, shear modulus and bulk modulus.
• Determine the change in length given mass, length and radius.

We now move from consideration of forces that affect the motion of an object (such as friction and drag) to those that affect an object’s shape. If a bulldozer pushes a car into a wall, the car will not move but it will noticeably change shape. A change in shape due to the application of a force is a deformation. Even very small forces are known to cause some deformation. For small deformations, two important characteristics are observed. First, the object returns to its original shape when the force is removed—that is, the deformation is elastic for small deformations. Second, the size of the deformation is proportional to the force—that is, for small deformations, Hooke’s law is obeyed. In equation form, Hooke’s law is given by

F=kΔL,F=kΔL, size 12{F=kΔL} {}
(1)

where ΔLΔL size 12{ΔL} {} is the amount of deformation (the change in length, for example) produced by the force FF size 12{F} {}, and kk size 12{k} {} is a proportionality constant that depends on the shape and composition of the object and the direction of the force. Note that this force is a function of the deformation ΔLΔL size 12{ΔL} {} —it is not constant as a kinetic friction force is. Rearranging this to

Δ L = F k Δ L = F k size 12{ΔL= { {F} over {k} } } {}
(2)

makes it clear that the deformation is proportional to the applied force. Figure 1 shows the Hooke’s law relationship between the extension ΔLΔL size 12{ΔL} {} of a spring or of a human bone. For metals or springs, the straight line region in which Hooke’s law pertains is much larger. Bones are brittle and the elastic region is small and the fracture abrupt. Eventually a large enough stress to the material will cause it to break or fracture.

## Hooke’s Law:

F = kΔL , F = kΔL , size 12{F=kΔL} {}
(3)

where ΔLΔL size 12{ΔL} {} is the amount of deformation (the change in length, for example) produced by the force FF size 12{F} {}, and kk size 12{k} {} is a proportionality constant that depends on the shape and composition of the object and the direction of the force.

Δ L = F k Δ L = F k size 12{ΔL= { {F} over {k} } } {}
(4)

The proportionality constant kk size 12{k} {} depends upon a number of factors for the material. For example, a guitar string made of nylon stretches when it is tightened, and the elongation ΔLΔL size 12{ΔL} {} is proportional to the force applied (at least for small deformations). Thicker nylon strings and ones made of steel stretch less for the same applied force, implying they have a larger kk size 12{k} {} (see Figure 2). Finally, all three strings return to their normal lengths when the force is removed, provided the deformation is small. Most materials will behave in this manner if the deformation is less that about 0.1% or about 1 part in 103103 size 12{"10" rSup { size 8{3} } } {}.

## Stretch Yourself a Little:

How would you go about measuring the proportionality constant kk size 12{k} {} of a rubber band? If a rubber band stretched 3 cm when a 100-g mass was attached to it, then how much would it stretch if two similar rubber bands were attached to the same mass—even if put together in parallel or alternatively if tied together in series?

We now consider three specific types of deformations: changes in length (tension and compression), sideways shear (stress), and changes in volume. All deformations are assumed to be small unless otherwise stated.

## Changes in Length—Tension and Compression: Elastic Modulus

A change in length ΔLΔL size 12{ΔL} {} is produced when a force is applied to a wire or rod parallel to its length L0L0 size 12{L rSub { size 8{0} } } {}, either stretching it (a tension) or compressing it. (See Figure 3.)

Experiments have shown that the change in length (ΔLΔL size 12{ΔL} {}) depends on only a few variables. As already noted, ΔLΔL size 12{ΔL} {} is proportional to the force FF size 12{F} {} and depends on the substance from which the object is made. Additionally, the change in length is proportional to the original length L0L0 size 12{L rSub { size 8{0} } } {} and inversely proportional to the cross-sectional area of the wire or rod. For example, a long guitar string will stretch more than a short one, and a thick string will stretch less than a thin one. We can combine all these factors into one equation for ΔLΔL size 12{ΔL} {}:

ΔL=1YFAL0,ΔL=1YFAL0, size 12{ΔL= { {1} over {Y} } { {F} over {A} } L rSub { size 8{0} } } {}
(5)

where ΔL ΔL size 12{ΔL} {} is the change in length, FF size 12{F} {} the applied force, YY size 12{Y} {} is a factor, called the elastic modulus or Young’s modulus, that depends on the substance, AA size 12{A} {} is the cross-sectional area, and L0L0 size 12{L rSub { size 8{0} } } {} is the original length. Table 1 lists values of YY size 12{A} {} for several materials—those with a large YY size 12{A} {} are said to have a large tensile strength because they deform less for a given tension or compression.

Table 1: Elastic Moduli1
Material Young’s modulus (tension–compression)Y ( 10 9 N/m 2 ) ( 10 9 N/m 2 ) Shear modulus S ( 10 9 N/m 2 ) ( 10 9 N/m 2 ) Bulk modulus B ( 10 9 N/m 2 ) ( 10 9 N/m 2 )
Aluminum 70 25 75
Bone – tension 16 80 8
Bone – compression 9
Brass 90 35 75
Brick 15
Concrete 20
Glass 70 20 30
Granite 45 20 45
Hair (human) 10
Hardwood 15 10
Iron, cast 100 40 90
Marble 60 20 70
Nylon 5
Polystyrene 3
Silk 6
Steel 210 80 130
Tendon 1
Acetone     0.7
Ethanol     0.9
Glycerin     4.5
Mercury     25
Water     2.2

Young’s moduli are not listed for liquids and gases in Table 1 because they cannot be stretched or compressed in only one direction. Note that there is an assumption that the object does not accelerate, so that there are actually two applied forces of magnitude FF size 12{F} {} acting in opposite directions. For example, the strings in Figure 3 are being pulled down by a force of magnitude ww size 12{w} {} and held up by the ceiling, which also exerts a force of magnitude ww size 12{w} {}.

### Example 1: The Stretch of a Long Cable

Suspension cables are used to carry gondolas at ski resorts. (See Figure 4) Consider a suspension cable that includes an unsupported span of 3 km. Calculate the amount of stretch in the steel cable. Assume that the cable has a diameter of 5.6 cm and the maximum tension it can withstand is 3.0×106 N3.0×106 N size 12{3 "." 0 times "10" rSup { size 8{6} } " N"} {}.

Strategy

The force is equal to the maximum tension, or F=3.0×106 NF=3.0×106 N size 12{F=3 "." 0 times "10" rSup { size 8{6} } " N"} {}. The cross-sectional area is πr2=2.46×103 m2πr2=2.46×103 m2 size 12{πr rSup { size 8{2} } =2 "." "46" times "10" rSup { size 8{ - 3} } " m" rSup { size 8{2} } } {}. The equation ΔL=1YFAL0ΔL=1YFAL0 size 12{ΔL= { {1} over {Y} } { {F} over {A} } L rSub { size 8{0} } } {} can be used to find the change in length.

Solution

All quantities are known. Thus,

Δ L = 1 210 × 10 9 N/m 2 3 . 0 × 10 6 N 2.46 × 10 –3 m 2 3020 m = 18 m . Δ L = 1 210 × 10 9 N/m 2 3 . 0 × 10 6 N 2.46 × 10 –3 m 2 3020 m = 18 m .
(6)

Discussion

This is quite a stretch, but only about 0.6% of the unsupported length. Effects of temperature upon length might be important in these environments.

Bones, on the whole, do not fracture due to tension or compression. Rather they generally fracture due to sideways impact or bending, resulting in the bone shearing or snapping. The behavior of bones under tension and compression is important because it determines the load the bones can carry. Bones are classified as weight-bearing structures such as columns in buildings and trees. Weight-bearing structures have special features; columns in building have steel-reinforcing rods while trees and bones are fibrous. The bones in different parts of the body serve different structural functions and are prone to different stresses. Thus the bone in the top of the femur is arranged in thin sheets separated by marrow while in other places the bones can be cylindrical and filled with marrow or just solid. Overweight people have a tendency toward bone damage due to sustained compressions in bone joints and tendons.

Another biological example of Hooke’s law occurs in tendons. Functionally, the tendon (the tissue connecting muscle to bone) must stretch easily at first when a force is applied, but offer a much greater restoring force for a greater strain. Figure 5 shows a stress-strain relationship for a human tendon. Some tendons have a high collagen content so there is relatively little strain, or length change; others, like support tendons (as in the leg) can change length up to 10%. Note that this stress-strain curve is nonlinear, since the slope of the line changes in different regions. In the first part of the stretch called the toe region, the fibers in the tendon begin to align in the direction of the stress—this is called uncrimping. In the linear region, the fibrils will be stretched, and in the failure region individual fibers begin to break. A simple model of this relationship can be illustrated by springs in parallel: different springs are activated at different lengths of stretch. Examples of this are given in the problems at end of this chapter. Ligaments (tissue connecting bone to bone) behave in a similar way.

Unlike bones and tendons, which need to be strong as well as elastic, the arteries and lungs need to be very stretchable. The elastic properties of the arteries are essential for blood flow. The pressure in the arteries increases and arterial walls stretch when the blood is pumped out of the heart. When the aortic valve shuts, the pressure in the arteries drops and the arterial walls relax to maintain the blood flow. When you feel your pulse, you are feeling exactly this—the elastic behavior of the arteries as the blood gushes through with each pump of the heart. If the arteries were rigid, you would not feel a pulse. The heart is also an organ with special elastic properties. The lungs expand with muscular effort when we breathe in but relax freely and elastically when we breathe out. Our skins are particularly elastic, especially for the young. A young person can go from 100 kg to 60 kg with no visible sag in their skins. The elasticity of all organs reduces with age. Gradual physiological aging through reduction in elasticity starts in the early 20s.

### Example 2: Calculating Deformation: How Much Does Your Leg Shorten When You Stand on It?

Calculate the change in length of the upper leg bone (the femur) when a 70.0 kg man supports 62.0 kg of his mass on it, assuming the bone to be equivalent to a uniform rod that is 40.0 cm long and 2.00 cm in radius.

Strategy

The force is equal to the weight supported, or

F=mg=62.0 kg9.80 m/s2=607.6 N,F=mg=62.0 kg9.80 m/s2=607.6 N, size 12{F= ital "mg"= left ("62" "." 0"kg" right ) left (9 "." "80""m/s" rSup { size 8{2} } right )="607" "." 6N} {}
(7)

and the cross-sectional area is πr2=1.257×103m2πr2=1.257×103m2 size 12{πr rSup { size 8{2} } =1 "." "257" times "10" rSup { size 8{ - 3} } m rSup { size 8{2} } } {}. The equation ΔL=1YFAL0ΔL=1YFAL0 size 12{ΔL= { {1} over {Y} } { {F} over {A} } L rSub { size 8{0} } } {} can be used to find the change in length.

Solution

All quantities except ΔLΔL size 12{ΔL} {} are known. Note that the compression value for Young’s modulus for bone must be used here. Thus,

Δ L = 1 9 × 10 9 N/m 2 607 . 6 N 1. 257 × 10 3 m 2 (0.400 m) = 2×10−5 m. Δ L = 1 9 × 10 9 N/m 2 607 . 6 N 1. 257 × 10 3 m 2 (0.400 m) = 2×10−5 m. alignl { stack { size 12{ΔL= { {1} over {9 times "10" rSup { size 8{9} } " N/m" rSup { size 8{2} } } } times { {"607" "." "6 N"} over {1 "." "257" times "10" rSup { size 8{ - 3} } " m" rSup { size 8{2} } } } times 0 "." "400 m"} {} # =0 "." "002" times "10" rSup { size 8{ - 3} } " m" {} } } {}
(8)

Discussion

This small change in length seems reasonable, consistent with our experience that bones are rigid. In fact, even the rather large forces encountered during strenuous physical activity do not compress or bend bones by large amounts. Although bone is rigid compared with fat or muscle, several of the substances listed in Table 1 have larger values of Young’s modulus YY size 12{Y} {}. In other words, they are more rigid and have greater tensile strength.

The equation for change in length is traditionally rearranged and written in the following form:

FA=YΔLL0.FA=YΔLL0. size 12{ { {F} over {A} } =Y { {ΔL} over {L rSub { size 8{0} } } } } {}
(9)

The ratio of force to area, FAFA size 12{ { {F} over {A} } } {}, is defined as stress (measured in N/m 2 N/m 2 ), and the ratio of the change in length to length, ΔLL0ΔLL0 size 12{ { {ΔL} over {L rSub { size 8{0} } } } } {}, is defined as strain (a unitless quantity). In other words,

stress=Y×strain.stress=Y×strain. size 12{"stress"=Y times "strain"} {}
(10)

In this form, the equation is analogous to Hooke’s law, with stress analogous to force and strain analogous to deformation. If we again rearrange this equation to the form

F=YAΔLL0,F=YAΔLL0, size 12{F= ital "YA" { {ΔL} over {L rSub { size 8{0} } } } } {}
(11)

we see that it is the same as Hooke’s law with a proportionality constant

k=YAL0.k=YAL0. size 12{k= { { ital "YA"} over {L rSub { size 8{0} } } } } {}
(12)

This general idea—that force and the deformation it causes are proportional for small deformations—applies to changes in length, sideways bending, and changes in volume.

### Stress:

The ratio of force to area, FAFA size 12{ { {F} over {A} } } {}, is defined as stress measured in N/m2.

### Strain:

The ratio of the change in length to length, ΔLL0ΔLL0 size 12{ { {ΔL} over {L rSub { size 8{0} } } } } {}, is defined as strain (a unitless quantity). In other words,

stress=Y×strain.stress=Y×strain. size 12{"stress"=Y times "strain"} {}
(13)

## Sideways Stress: Shear Modulus

Figure 6 illustrates what is meant by a sideways stress or a shearing force. Here the deformation is called ΔxΔx size 12{Δx} {} and it is perpendicular to L0L0 size 12{L rSub { size 8{0} } } {}, rather than parallel as with tension and compression. Shear deformation behaves similarly to tension and compression and can be described with similar equations. The expression for shear deformation is

Δx=1SFAL0,Δx=1SFAL0, size 12{Δx= { {1} over {S} } { {F} over {A} } L rSub { size 8{0} } } {}
(14)

where SS size 12{F} {} is the shear modulus (see Table 1) and FF size 12{F} {} is the force applied perpendicular to L0L0 size 12{L rSub { size 8{0} } } {} and parallel to the cross-sectional area AA size 12{A} {}. Again, to keep the object from accelerating, there are actually two equal and opposite forces FF size 12{F} {} applied across opposite faces, as illustrated in Figure 6. The equation is logical—for example, it is easier to bend a long thin pencil (small AA size 12{A} {}) than a short thick one, and both are more easily bent than similar steel rods (large SS size 12{S} {}).

### Shear Deformation:

Δx=1SFAL0,Δx=1SFAL0, size 12{Δx= { {1} over {S} } { {F} over {A} } L rSub { size 8{0} } } {}
(15)

where SS size 12{S} {} is the shear modulus and FF size 12{F} {} is the force applied perpendicular to L0L0 size 12{L rSub { size 8{0} } } {} and parallel to the cross-sectional area AA size 12{A} {}.

Examination of the shear moduli in Table 1 reveals some telling patterns. For example, shear moduli are less than Young’s moduli for most materials. Bone is a remarkable exception. Its shear modulus is not only greater than its Young’s modulus, but it is as large as that of steel. This is one reason that bones can be long and relatively thin. Bones can support loads comparable to that of concrete and steel. Most bone fractures are not caused by compression but by excessive twisting and bending.

The spinal column (consisting of 26 vertebral segments separated by discs) provides the main support for the head and upper part of the body. The spinal column has normal curvature for stability, but this curvature can be increased, leading to increased shearing forces on the lower vertebrae. Discs are better at withstanding compressional forces than shear forces. Because the spine is not vertical, the weight of the upper body exerts some of both. Pregnant women and people that are overweight (with large abdomens) need to move their shoulders back to maintain balance, thereby increasing the curvature in their spine and so increasing the shear component of the stress. An increased angle due to more curvature increases the shear forces along the plane. These higher shear forces increase the risk of back injury through ruptured discs. The lumbosacral disc (the wedge shaped disc below the last vertebrae) is particularly at risk because of its location.

The shear moduli for concrete and brick are very small; they are too highly variable to be listed. Concrete used in buildings can withstand compression, as in pillars and arches, but is very poor against shear, as might be encountered in heavily loaded floors or during earthquakes. Modern structures were made possible by the use of steel and steel-reinforced concrete. Almost by definition, liquids and gases have shear moduli near zero, because they flow in response to shearing forces.

### Example 3: Calculating Force Required to Deform: That Nail Does Not Bend Much Under a Load

Find the mass of the picture hanging from a steel nail as shown in Figure 7, given that the nail bends only 1.80 µm 1.80 µm size 12{ left (1 "." "80" times "10" rSup { size 8{ - 6} } m right )} {}. (Assume the shear modulus is known to two significant figures.)

Strategy

The force FF size 12{F} {} on the nail (neglecting the nail’s own weight) is the weight of the picture ww size 12{w} {}. If we can find ww size 12{w} {}, then the mass of the picture is just wgwg size 12{ { {w} over {g} } } {} . The equation Δx=1SFAL0Δx=1SFAL0 size 12{Δx= { {1} over {S} } { {F} over {A} } L rSub { size 8{0} } } {} can be solved for FF size 12{F} {}.

Solution

Solving the equation Δx=1SFAL0Δx=1SFAL0 size 12{Δx= { {1} over {S} } { {F} over {A} } L rSub { size 8{0} } } {} for F F , we see that all other quantities can be found:

F=SAL0Δx.F=SAL0Δx. size 12{F= { { ital "SA"} over {L rSub { size 8{0} } } } Δx} {}
(16)

S is found in Table 1 and is S=80×109 N/m2S=80×109 N/m2 size 12{S="80" times "10" rSup { size 8{9} } " N/m" rSup { size 8{2} } } {}. The radius rr size 12{r} {} is 0.750 mm (as seen in the figure), so the cross-sectional area is

A=πr2=1.77×106m2.A=πr2=1.77×106m2. size 12{A=πr rSup { size 8{2} } =1 "." "77" times "10" rSup { size 8{ - 6} } m rSup { size 8{2} } } {}
(17)

The value for L0L0 size 12{L rSub { size 8{0} } } {} is also shown in the figure. Thus,

F = ( 80 × 10 9 N/m 2 ) ( 1 . 77 × 10 6 m 2 ) ( 5 . 00 × 10 3 m ) ( 1 . 80 × 10 6 m ) = 51 N. F = ( 80 × 10 9 N/m 2 ) ( 1 . 77 × 10 6 m 2 ) ( 5 . 00 × 10 3 m ) ( 1 . 80 × 10 6 m ) = 51 N. size 12{F= { { $$"80" times "10" rSup { size 8{9} } " N/m" rSup { size 8{2} }$$ $$1 "." "77" times "10" rSup { size 8{ - 6} } " m" rSup { size 8{2} }$$ } over { $$5 "." "00" times "10" rSup { size 8{ - 3} } " m"$$ } } times $$1 "." "80" times "10" rSup { size 8{ - 6} } " m"$$ ="51"N} {}
(18)

This 51 N force is the weight w w of the picture, so the picture’s mass is

m=wg=Fg=5.2 kg.m=wg=Fg=5.2 kg. size 12{m= { {w} over {g} } = { {F} over {g} } =5 "." 2" kg"} {}
(19)

Discussion

This is a fairly massive picture, and it is impressive that the nail flexes only 1.80 µm 1.80 µm —an amount undetectable to the unaided eye.

## Changes in Volume: Bulk Modulus

An object will be compressed in all directions if inward forces are applied evenly on all its surfaces as in Figure 8. It is relatively easy to compress gases and extremely difficult to compress liquids and solids. For example, air in a wine bottle is compressed when it is corked. But if you try corking a brim-full bottle, you cannot compress the wine—some must be removed if the cork is to be inserted. The reason for these different compressibilities is that atoms and molecules are separated by large empty spaces in gases but packed close together in liquids and solids. To compress a gas, you must force its atoms and molecules closer together. To compress liquids and solids, you must actually compress their atoms and molecules, and very strong electromagnetic forces in them oppose this compression.

We can describe the compression or volume deformation of an object with an equation. First, we note that a force “applied evenly” is defined to have the same stress, or ratio of force to area FAFA size 12{ left ( { {F} over {A} } right )} {} on all surfaces. The deformation produced is a change in volume ΔVΔV size 12{ΔV} {}, which is found to behave very similarly to the shear, tension, and compression previously discussed. (This is not surprising, since a compression of the entire object is equivalent to compressing each of its three dimensions.) The relationship of the change in volume to other physical quantities is given by

ΔV=1BFAV0,ΔV=1BFAV0, size 12{ΔV= { {1} over {B} } { {F} over {A} } V rSub { size 8{0} } } {}
(20)

where B B is the bulk modulus (see Table 1), V0V0 size 12{V rSub { size 8{0} } } {} is the original volume, and FAFA size 12{ { {F} over {A} } } {} is the force per unit area applied uniformly inward on all surfaces. Note that no bulk moduli are given for gases.

What are some examples of bulk compression of solids and liquids? One practical example is the manufacture of industrial-grade diamonds by compressing carbon with an extremely large force per unit area. The carbon atoms rearrange their crystalline structure into the more tightly packed pattern of diamonds. In nature, a similar process occurs deep underground, where extremely large forces result from the weight of overlying material. Another natural source of large compressive forces is the pressure created by the weight of water, especially in deep parts of the oceans. Water exerts an inward force on all surfaces of a submerged object, and even on the water itself. At great depths, water is measurably compressed, as the following example illustrates.

### Example 4: Calculating Change in Volume with Deformation: How Much Is Water Compressed at Great Ocean Depths?

Calculate the fractional decrease in volume (ΔVV0ΔVV0 size 12{ { {ΔV} over {V rSub { size 8{0} } } } } {}) for seawater at 5.00 km depth, where the force per unit area is 5 . 00 × 10 7 N / m 2 5 . 00 × 10 7 N / m 2 size 12{5 "." "00" times "10" rSup { size 8{7} } N/m rSup { size 8{2} } } {} .

Strategy

Equation ΔV=1BFAV0ΔV=1BFAV0 is the correct physical relationship. All quantities in the equation except ΔVV0ΔVV0 are known.

Solution

Solving for the unknown ΔVV0ΔVV0 gives

ΔVV0=1BFA.ΔVV0=1BFA. size 12{ { {ΔV} over {V rSub { size 8{0} } } } = { {1} over {B} } { {F} over {A} } } {}
(21)

Substituting known values with the value for the bulk modulus B B from Table 1,

Δ V V0 = 5.00 × 10 7 N/m 2 2 . 2 × 10 9 N/m 2 = 0.023=2.3%. Δ V V0 = 5.00 × 10 7 N/m 2 2 . 2 × 10 9 N/m 2 = 0.023=2.3%.
(22)

Discussion

Although measurable, this is not a significant decrease in volume considering that the force per unit area is about 500 atmospheres (1 million pounds per square foot). Liquids and solids are extraordinarily difficult to compress.

Conversely, very large forces are created by liquids and solids when they try to expand but are constrained from doing so—which is equivalent to compressing them to less than their normal volume. This often occurs when a contained material warms up, since most materials expand when their temperature increases. If the materials are tightly constrained, they deform or break their container. Another very common example occurs when water freezes. Water, unlike most materials, expands when it freezes, and it can easily fracture a boulder, rupture a biological cell, or crack an engine block that gets in its way.

Other types of deformations, such as torsion or twisting, behave analogously to the tension, shear, and bulk deformations considered here.

## Section Summary

• Hooke’s law is given by
F=kΔL,F=kΔL, size 12{F=kΔL} {}
(23)

where ΔLΔL size 12{ΔL} {} is the amount of deformation (the change in length), FF size 12{F} {} is the applied force, and kk size 12{k} {} is a proportionality constant that depends on the shape and composition of the object and the direction of the force. The relationship between the deformation and the applied force can also be written as

ΔL=1YFAL0,ΔL=1YFAL0, size 12{ΔL= { {1} over {Y} } { {F} over {A} } L rSub { size 8{0} } } {}
(24)

where YY size 12{Y} {} is Young’s modulus, which depends on the substance, AA size 12{A} {} is the cross-sectional area, and L0L0 size 12{L rSub { size 8{0} } } {} is the original length.

• The ratio of force to area, FAFA size 12{ { {F} over {A} } } {}, is defined as stress, measured in N/m2.
• The ratio of the change in length to length, ΔLL0ΔLL0 size 12{ { {ΔL} over {L rSub { size 8{0} } } } } {}, is defined as strain (a unitless quantity). In other words,
stress=Y×strain.stress=Y×strain. size 12{"stress"=Y times "strain"} {}
(25)
• The expression for shear deformation is
Δx=1SFAL0,Δx=1SFAL0, size 12{Δx= { {1} over {S} } { {F} over {A} } L rSub { size 8{0} } } {}
(26)

where S S is the shear modulus and F F is the force applied perpendicular to L 0 L 0 and parallel to the cross-sectional area A A .

• The relationship of the change in volume to other physical quantities is given by
ΔV=1BFAV0,ΔV=1BFAV0, size 12{ΔV= { {1} over {B} } { {F} over {A} } V rSub { size 8{0} } } {}
(27)

where B B is the bulk modulus, V 0 V 0 is the original volume, and FAFA size 12{ { {F} over {A} } } {} is the force per unit area applied uniformly inward on all surfaces.

## Conceptual Questions

### Exercise 1

The elastic properties of the arteries are essential for blood flow. Explain the importance of this in terms of the characteristics of the flow of blood (pulsating or continuous).

### Exercise 2

What are you feeling when you feel your pulse? Measure your pulse rate for 10 s and for 1 min. Is there a factor of 6 difference?

### Exercise 3

Examine different types of shoes, including sports shoes and thongs. In terms of physics, why are the bottom surfaces designed as they are? What differences will dry and wet conditions make for these surfaces?

### Exercise 4

Would you expect your height to be different depending upon the time of day? Why or why not?

### Exercise 5

Why can a squirrel jump from a tree branch to the ground and run away undamaged, while a human could break a bone in such a fall?

### Exercise 6

Explain why pregnant women often suffer from back strain late in their pregnancy.

### Exercise 7

An old carpenter’s trick to keep nails from bending when they are pounded into hard materials is to grip the center of the nail firmly with pliers. Why does this help?

### Exercise 8

When a glass bottle full of vinegar warms up, both the vinegar and the glass expand, but vinegar expands significantly more with temperature than glass. The bottle will break if it was filled to its tightly capped lid. Explain why, and also explain how a pocket of air above the vinegar would prevent the break. (This is the function of the air above liquids in glass containers.)

## Problems & Exercises

### Exercise 1

During a circus act, one performer swings upside down hanging from a trapeze holding another, also upside-down, performer by the legs. If the upward force on the lower performer is three times her weight, how much do the bones (the femurs) in her upper legs stretch? You may assume each is equivalent to a uniform rod 35.0 cm long and 1.80 cm in radius. Her mass is 60.0 kg.

#### Solution

1 . 90 × 10 3 cm 1 . 90 × 10 3 cm size 12{1 "." "90" times "10" rSup { size 8{ - 3} } "cm"} {}
(28)

### Exercise 2

During a wrestling match, a 150 kg wrestler briefly stands on one hand during a maneuver designed to perplex his already moribund adversary. By how much does the upper arm bone shorten in length? The bone can be represented by a uniform rod 38.0 cm in length and 2.10 cm in radius.

### Exercise 3

(a) The “lead” in pencils is a graphite composition with a Young’s modulus of about 1 × 10 9 N / m 2 1 × 10 9 N / m 2 size 12{5 "." "00" times "10" rSup { size 8{7} } N/m rSup { size 8{2} } } {} . Calculate the change in length of the lead in an automatic pencil if you tap it straight into the pencil with a force of 4.0 N. The lead is 0.50 mm in diameter and 60 mm long. (b) Is the answer reasonable? That is, does it seem to be consistent with what you have observed when using pencils?

#### Solution

(a)1 mm
(b) This does seem reasonable, since the lead does seem to shrink a little when you push on it.

### Exercise 4

TV broadcast antennas are the tallest artificial structures on Earth. In 1987, a 72.0-kg physicist placed himself and 400 kg of equipment at the top of one 610-m high antenna to perform gravity experiments. By how much was the antenna compressed, if we consider it to be equivalent to a steel cylinder 0.150 m in radius?

### Exercise 5

(a) By how much does a 65.0-kg mountain climber stretch her 0.800-cm diameter nylon rope when she hangs 35.0 m below a rock outcropping? (b) Does the answer seem to be consistent with what you have observed for nylon ropes? Would it make sense if the rope were actually a bungee cord?

#### Solution

(a)9 cm
(b)This seems reasonable for nylon climbing rope, since it is not supposed to stretch that much.

### Exercise 6

A 20.0-m tall hollow aluminum flagpole is equivalent in strength to a solid cylinder 4.00 cm in diameter. A strong wind bends the pole much as a horizontal force of 900 N exerted at the top would. How far to the side does the top of the pole flex?

### Exercise 7

As an oil well is drilled, each new section of drill pipe supports its own weight and that of the pipe and drill bit beneath it. Calculate the stretch in a new 6.00 m length of steel pipe that supports 3.00 km of pipe having a mass of 20.0 kg/m and a 100-kg drill bit. The pipe is equivalent in strength to a solid cylinder 5.00 cm in diameter.

8.59 mm

### Exercise 8

Calculate the force a piano tuner applies to stretch a steel piano wire 8.00 mm, if the wire is originally 0.850 mm in diameter and 1.35 m long.

### Exercise 9

A vertebra is subjected to a shearing force of 500 N. Find the shear deformation, taking the vertebra to be a cylinder 3.00 cm high and 4.00 cm in diameter.

#### Solution

1 . 49 × 10 7 m 1 . 49 × 10 7 m size 12{1 "." "49" times "10" rSup { size 8{ - 7} } m} {}
(29)

### Exercise 10

A disk between vertebrae in the spine is subjected to a shearing force of 600 N. Find its shear deformation, taking it to have the shear modulus of 1 × 10 9 N / m 2 1 × 10 9 N / m 2 size 12{5 "." "00" times "10" rSup { size 8{7} } N/m rSup { size 8{2} } } {} . The disk is equivalent to a solid cylinder 0.700 cm high and 4.00 cm in diameter.

### Exercise 11

When using a pencil eraser, you exert a vertical force of 6.00 N at a distance of 2.00 cm from the hardwood-eraser joint. The pencil is 6.00 mm in diameter and is held at an angle of 20.0º 20.0º to the horizontal. (a) By how much does the wood flex perpendicular to its length? (b) How much is it compressed lengthwise?

#### Solution

(a) 3.99×107m3.99×107m size 12{3 "." "99" times "10" rSup { size 8{ - 7} } m} {}

(b) 9.67×108m9.67×108m size 12{9 "." "67" times "10" rSup { size 8{ - 8} } m} {}

### Exercise 12

To consider the effect of wires hung on poles, we take data from (Reference), in which tensions in wires supporting a traffic light were calculated. The left wire made an angle 30.0º 30.0º below the horizontal with the top of its pole and carried a tension of 108 N. The 12.0 m tall hollow aluminum pole is equivalent in strength to a 4.50 cm diameter solid cylinder. (a) How far is it bent to the side? (b) By how much is it compressed?

### Exercise 13

A farmer making grape juice fills a glass bottle to the brim and caps it tightly. The juice expands more than the glass when it warms up, in such a way that the volume increases by 0.2% (that is, ΔV/V0=2×103ΔV/V0=2×103 size 12{ΔV/V rSub { size 8{0} } =2 times "10" rSup { size 8{ - 3} } } {}) relative to the space available. Calculate the magnitude of the normal force exerted by the juice per square centimeter if its bulk modulus is 1.8×109N/m21.8×109N/m2 size 12{1 "." 8 times "10" rSup { size 8{9} } "N/m" rSup { size 8{2} } } {}, assuming the bottle does not break. In view of your answer, do you think the bottle will survive?

#### Solution

4×106N/m24×106N/m2 size 12{4 times "10" rSup { size 8{6} } `"N/m" rSup { size 8{2} } "." } {}. This is about 36 atm, greater than a typical jar can withstand.

### Exercise 14

(a) When water freezes, its volume increases by 9.05% (that is, Δ V / V 0 = 9 . 05 × 10 2 Δ V / V 0 = 9 . 05 × 10 2 size 12{ΔV/V rSub { size 8{0} } =9 "." "05" times "10" rSup { size 8{ - 2} } } {} ). What force per unit area is water capable of exerting on a container when it freezes? (It is acceptable to use the bulk modulus of water in this problem.) (b) Is it surprising that such forces can fracture engine blocks, boulders, and the like?

### Exercise 15

This problem returns to the tightrope walker studied in (Reference), who created a tension of 3 . 94 × 10 3 N 3 . 94 × 10 3 N size 12{3 "." "94" times "10" rSup { size 8{3} } } {} in a wire making an angle 5.0º 5.0º below the horizontal with each supporting pole. Calculate how much this tension stretches the steel wire if it was originally 15 m long and 0.50 cm in diameter.

1.4 cm

### Exercise 16

The pole in Figure 9 is at a 90.0º 90.0º bend in a power line and is therefore subjected to more shear force than poles in straight parts of the line. The tension in each line is 4.00×104N4.00×104N size 12{4 "." "00" times "10" rSup { size 8{4} } N} {}, at the angles shown. The pole is 15.0 m tall, has an 18.0 cm diameter, and can be considered to have half the strength of hardwood. (a) Calculate the compression of the pole. (b) Find how much it bends and in what direction. (c) Find the tension in a guy wire used to keep the pole straight if it is attached to the top of the pole at an angle of 30.0º 30.0º with the vertical. (Clearly, the guy wire must be in the opposite direction of the bend.)

## Footnotes

1. Approximate and average values. Young’s moduli Y Y size 12{Y} {} for tension and compression sometimes differ but are averaged here. Bone has significantly different Young’s moduli for tension and compression.

## Glossary

deformation:
change in shape due to the application of force
Hooke’s law:
proportional relationship between the force FF on a material and the deformation ΔLΔL it causes, F=kΔLF=kΔL size 12{F=kΔL} {}
tensile strength:
measure of deformation for a given tension or compression
stress:
ratio of force to area
strain:
ratio of change in length to original length
shear deformation:
deformation perpendicular to the original length of an object

## Content actions

PDF | EPUB (?)

### What is an EPUB file?

EPUB is an electronic book format that can be read on a variety of mobile devices.

#### Collection to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

#### Definition of a lens

##### Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

##### What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

##### Who can create a lens?

Any individual member, a community, or a respected organization.

##### What are tags?

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks

#### Module to:

My Favorites (?)

'My Favorites' is a special kind of lens which you can use to bookmark modules and collections. 'My Favorites' can only be seen by you, and collections saved in 'My Favorites' can remember the last module you were on. You need an account to use 'My Favorites'.

| A lens I own (?)

#### Definition of a lens

##### Lenses

A lens is a custom view of the content in the repository. You can think of it as a fancy kind of list that will let you see content through the eyes of organizations and people you trust.

##### What is in a lens?

Lens makers point to materials (modules and collections), creating a guide that includes their own comments and descriptive tags about the content.

##### Who can create a lens?

Any individual member, a community, or a respected organization.

##### What are tags?

Tags are descriptors added by lens makers to help label content, attaching a vocabulary that is meaningful in the context of the lens.

| External bookmarks